FREE North Arkansas: 1FZ-FE parts, LX450 F+R springs, rear window seal

[nagrom46]

Vehicle Model

1. 80 Series

Located in north central Arkansas. Must pick up. May ship some smaller items on your dime.

ALL ENGINE PARTS ARE GONE

“Free” = beer would be nice but not necessary.

Need to clean out shop space and want this stuff gone before I toss it.

May add other stuff as I’m cleaning up.

The block is from a 1996 LX with 218k miles. Cylinder 6 has pitting. The classic “was running when pulled”. I’ve hit er with WD-40 every now and then

All other parts are from a 1994. I picked up a used 1994 from a MUD member and used that block and rotating assembly and mated it to my 1996 head and others.

Rear window gasket is in good shape in my opinion.

 

[nagrom46]

 

[Tancruiser]

Are those stock springs ? Thanks

 

[nagrom46]

Are those stock springs ? Thanks

Yes

 

[dr_dobro]

Is the aluminum sub oil pan is from the 96 ? From photos, looks like it ?
Would you ship it ? And How much ?

Many thanks
D.

 

[nagrom46]

Is the aluminum sub oil pan is from the 96 ? From photos, looks like it ?
Would you ship it ? And How much ?

Many thanks
D.

1994. Used my 96 upper pan for the crank position sensor. The pan available is for OBD1. That’s my understanding anyways. Could be wrong?

 

[dr_dobro]

1994. Used my 96 upper pan for the crank position sensor. The pan available is for OBD1. That’s my understanding anyways. Could be wrong?

Got it, in the same boat. Rebuilding a 1994 for a 96 and looking for the DOB 2 pan

 

[Fj80oregon]

Got it, in the same boat. Rebuilding a 1994 for a 96 and looking for the DOB 2 pan

That pan will work for you Toyota has done the hard work and cast the bung for the CPS. You just need to tap and thread for the two studs and drill out the hole for the CPS.

 

[dr_dobro]

That pan will work for you Toyota has done the hard work and cast the bung for the CPS. You just need to tap and thread for the two studs and drill out the hole for the CPS.

Oh shoot, never realise this !!!!!
Thanks bud !