Need help picking springs (1 Viewer)

[lanechurch920]

Have a toyota about 8 inch lift. my springs right now are really rough for one but my passenger side is leaning because the have been bent .it it a inch shorter in heigh and length were can I find new springs with same bend one side is like 45.5" and other is 47" in length any advice would help

 

[Hanz]

Were your springs two different lengths to begin with?

Are they only two different lengths now because something is bent?

What year, make and model? Rear leaf springs?

 

[lanechurch920]

It's a 94 Toyota pickup and the springs used to be the same it's just from being bent

 

[Hanz]

You'll probably need to get a new pair of custom made leaf spring packs.

You can try:

Alcan Spring - Manufactures Fine Custom Leaf Springs

or

Deaver Suspension

Good Luck

 

[lanechurch920]

Were do I measure my springs to no what to get and also idk what the lift is idk how to figure it out

 

[Hanz]

Measure the distance between the eyes of the springs. Then measure the height of the springs from the bottom of the spring pack (in the center) to the imaginary line centered between the eyes.

Write down the measurements and give the spring shop a call. They should be able to handle it from there.

 

[Brake Weight]

Measure the distance between the eyes of the springs. Then measure the height of the springs from the bottom of the spring pack (in the center) to the imaginary line centered between the eyes.

Write down the measurements and give the spring shop a call. They should be able to handle it from there.

Count the leafs, too. Give them a good estimated weight of what's gonna be on them all the time.