Misc parts-FJ40,mini,trail 90,springs,axles,trany,U-bolt flip,tires/wheels,etc.

[Cruiseralive]

Parts off 74 FJ40 unless otherwise stated.
Located near Auburn, CA- rather not ship.
Pictures available on request-

-For SUA FJ40 with standard saginaw power steering- Large pattern arms (from mini), mini tie rod, short drag link (disclaimer- modified by me so trail use only-but strong as bull), 3 inch drop pitman arm, all mini tre's except GM to pitman- $100

-Short drag link for saginaw conversion- NEW- $20

-Set of nuckles, hubs, drum brakes (good cylinders)- $30

-Tie rod (strait-only used a couple years) with good ends and second for trail spare only- $50

-Pair of stock birfields, course- $20

-4 speed trany (year ?)- $100

-Add a leaf, long with a couple inches trimmed off, 2- $20

-2.5 in lift springs, skyjacker, 2.5 in wide, used on front of FJ40, SUA- $50

-Early (course spline) rear FJ40 axles- $20
__________________________________________________ ____________________

-U-bolt flip for SUA, MAF, with rear shock pins, 2 rubicon runs- SOLD
-FJ55, 4 in lift rear springs, MAF, 2 rubicon runs- SOLD
-Tow bar with hardware, mounted but never used- SOLD
-83 truck front housing with stock? third- SOLD
-83 truck front inner axles (stock)- SOLD
-75 Honda trail 90, not running, with partial parts bike, custom trailor hitch- SOLD!!
-BFG AT, 33x12.5x15 on 15x10(8?) aluminum 6 on 5.5, tires have good tread but the rubber is weatherd, probably best for trail or shop, 4- SOLD

 

[orangefj45]

bump

 

[ROOSTER]

PM sent

 

[Tripower389]

I'm Intrested i'n the Tow bar and hardware do you have any pics ?

- jason

 

[Cruiseralive]

Shipping would be a pain on this tow bar. I think its MAF and I think they have it new for $150? and shipping may be less from them. If you really want to try here is a pic. The silver bar in the middle is part of a canopy, not the tow bar. Hardware is below the bar.

Eric

 

[kdink79]

Good Buy

Got the flip kit in mail today. Everything looked good, just as promised.
Great guy to deal with.

Thanks Eric

 

[2badfjs]

i cant believe i missed this

sorry i'm outta cash and coulda sent ya couple a $$$$

do you still have the rear 55 springs?

 

[Cruiseralive]

I still have everything except the U-bolt flip. These springs must cost a lot to send to Denver area if that is where you are.

I would like to bring everything that doesnt sell here to the valley swap meet April 22?

Eric

 

[Cruiseralive]

Still have a few goodies- support my high steer fund

Please

 

[Cruiseralive]

Some new, some gone

 

[richardmvaldez]

is the transfercase on the tranny i'm in truckee

 

[B6i6K6e6R6b6O6y]

what about the 2.5" lift springs? do you have all 4? or just the front?

 

[Cruiseralive]

The transfer case is on the tranny but it is not for sale. I bought the set for the T case and have no use for the 4 speed.

I just have the one set of 2.5 in springs. These springs are slightly narrower than stock springs- they measere about 2.5 in wide. They should work for front or back. I used them in the front and they were very flexy.

Eric

 

[65fj40]

would you still happen to have the add a leaf springs? if so im interested in them Im located in FL would you ship?

EMAIL- cruiser7740@yahoo.com

 

[OnTheSpot]

pics of springs please

 

[Cruiseralive]

would you still happen to have the add a leaf springs? if so im interested in them Im located in FL would you ship?

I would rather not ship the add a leafs I think they werent very much $ from manafre. Let me know if I have the last pair on earth and Ill see what I can do.

pics of springs please

Here they are. 2.5 in wide but I ran them in the stock hangers. Are you nearby Auburn CA cause I dont want to ship.