A couple thousand miles ago I rebooted the CV axles due to failed boots. The flanges seem in good condition. Replaced the seals at the hub and diff as well. A couple days ago I've noticed at low speed (aka while parking) when the steering wheel is positioned at extremes (fully turned left or right) the truck was starting to drag the front wheels as if the truck was held by something. No metal sounds. Once the steering wheel is turned back a little it drives normally. I lifted the truck and checked free spinning at the same extreme positions - no problem, the wheels are spinning with a finger. Not a sound. The diff oil is there.
Need advice what might be the issue and how to check
Need advice what might be the issue and how to check
