vtcruiser60
SILVER Star
Lane....any of these look like the parts?
Lane...spacer pictures
- Thread starter vtcruiser60
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I sent the pic to Junior, I hope one might be but not sure.
fourlow&go
@ the speed of plaid
If a half inch bolt fits in #2 in the pic, that's it!
#1 looks like it might be the spacer for the adapter bearing, I'll mock up the tcase today and see if the one I have is correct. Might need that one too.
Jr.
#1 looks like it might be the spacer for the adapter bearing, I'll mock up the tcase today and see if the one I have is correct. Might need that one too.
Jr.
vtcruiser60
SILVER Star
- Thread starter
- #4
Lane or JR....just send me a mailing address here, or as a personal message and I'll drop all four parts in the mail today.
fourlow&go
@ the speed of plaid
vtcruiser60
PM sent, thank you.
I feel like such a heel, I found the output washer today, on the floor.
The only reason I found it is my table collapsed under the weight of the tranny and tcase. Partical board just isn't designed for all that weight I guess.
Thankfully it was a nice slow collapse and there was no small parts on the table, no damage, nothing lost.
So now the table is fixed and we're back in business, or so I thought.
There is no adapter bearing in the box of parts, Federal Mogul #N307LOE
The bearings I do have appear to be for the tcase outputs, crud!
Making calls to try and find one now.
Also missing Toyota spacer#90201-35070
I'm hoping the one posted in the pic is the right one or it's off to Toyota.
Thanks for your patience Lane
Jr.
PM sent, thank you.
I feel like such a heel, I found the output washer today, on the floor.
The only reason I found it is my table collapsed under the weight of the tranny and tcase. Partical board just isn't designed for all that weight I guess.
Thankfully it was a nice slow collapse and there was no small parts on the table, no damage, nothing lost.
So now the table is fixed and we're back in business, or so I thought.
There is no adapter bearing in the box of parts, Federal Mogul #N307LOE
The bearings I do have appear to be for the tcase outputs, crud!
Making calls to try and find one now.
Also missing Toyota spacer#90201-35070
I'm hoping the one posted in the pic is the right one or it's off to Toyota.
Thanks for your patience Lane
Jr.
vtcruiser60
SILVER Star
- Thread starter
- #6
I got your PM and am mailing out the spacer in today's mail....should be there in 2 days or so. Glad to help. Give a holler if anything else comes up!
.
Thanks for your patience Lane
Jr.[/QUOTE]
Thank you for going way beyond to help get this thing together!
Good Cruiser Karma here!
Thanks for your patience Lane
Jr.[/QUOTE]
Thank you for going way beyond to help get this thing together!
Good Cruiser Karma here!
fourlow&go
@ the speed of plaid
Kieran (sp?)
Received the spacers in the mail yesterday, thank you very much! Unfortunately none of them will work.
I'll put them in the Cruiser and will return them next time we meet. Took a ride down to IRA Toyota yesterday afternoon, gave them the part number, "six bucks, will have it tomorrow" so I ordered two.
Bearing will be in on friday, we're moving forward.
Jr.
Received the spacers in the mail yesterday, thank you very much! Unfortunately none of them will work.
I'll put them in the Cruiser and will return them next time we meet. Took a ride down to IRA Toyota yesterday afternoon, gave them the part number, "six bucks, will have it tomorrow" so I ordered two.
Bearing will be in on friday, we're moving forward.
Jr.
fourlow&go
@ the speed of plaid
Toyota called, "spacer is discontinued, can't find it anywhere"
Off to go rip apart a junk H-42 and see what it has for spacers.
Off to go rip apart a junk H-42 and see what it has for spacers.
