JC Whitney Cabinets

[Radd Cruisers]

Anyone currently on this board own or have seen the quality of these cabinets? Look at these cabinets
Garage Toys Stainless Steel Garage Organizer/Storage System Rolling Locker : JC Whitney: Tools & Garage

Thanks
Rob

 

[Awl_TEQ]

Rob

Looks like the add says only the doors are stainless. The body pictured is powder coated and nobody makes a body in stainless and then covers it in powder. The outer door skins are 18 Ga. stainless which is quite sturdy - a lot of manufacturers would make it much thinner, especially in stainle$$. The write up mentions "door fronts" which would imply there is an inner door skin. That and 18 Ga. skins would make doors that don't wobble when swung open. 6" castors are a good size. I'm curious what Ga. material the body is made of.

Bottom line is I could not make that for that price in my shop. My cost for material, hardware and powder coating would be higher than the sale price shown. Is that USD or Canadian? The add says free shipping over $75.

My 0.02

Kevin

 

[Radd Cruisers]

Thanks Kevin, yes the ad is US.

Looking for two cabs to go in the garage, original MDF(crap board) fell apart.

Looks like the add says only the doors are stainless. The body pictured is powder coated and nobody makes a body in stainless and then covers it in powder. The outer door skins are 18 Ga. stainless which is quite sturdy - a lot of manufacturers would make it much thinner, especially in stainle$$. The write up mentions "door fronts" which would imply there is an inner door skin. That and 18 Ga. skins would make doors that don't wobble when swung open. 6" castors are a good size. I'm curious what Ga. material the body is made of.

Bottom line is I could not make that for that price in my shop. My cost for material, hardware and powder coating would be higher than the sale price shown. Is that USD or Canadian? The add says free shipping over $75.

My 0.02

Kevin