Is The Toyota EPC Site Down?

[Gerrha]

This not specifically a tech related question but does anyone know if the Toyota USA EPC Data site no longer works? This site has become my daily go to bible, and it is gone on my computer for about a week now. I have tried on Edge, Firefox, and Chrome - none of these can access the site. This is the link I use.

Toyota Land Cruiser - FZJ80L-GNPEKA complectation - Auto parts

Electronic parts catalog for Land Cruiser FZJ80L-GNPEKA complectation. Engine, chassis, body and and electric spare parts for FZJ80L-GNPEKA Land Cruiser.

toyota-usa.epc-data.com

Hopefully, I have made some reversible change with my computer, but I am getting nervous that it has been deleted...

 

[Malleus]

Doesn't work for me either, but an out of date security token doesn't mean much these days.

 

[Gerrha]

Doesn't work for me either, but an out of date security token doesn't mean much these days.

Yikes!

 

[mudgudgeon]

I haven't seen that site, but I recently used Toyota Technical Information Systems (TIS) page to access manuals. Paid a fee for a 48hr subscription.

Definitely isn't a straight forward as searching through an index page, then going to the relevant section

 

[gorbilax]

Isn't working for me either, and I'm right there with you. I've been using that site for several years as I've been gradually replacing everything in my 80, and lately I've been using it pretty much weekly. It's a huge loss. PartSouq's catalog comes close as a replacement, but I really miss the direct links to Amayama, which is my preferred vendor. At least now I know it's not just me. Thanks for the post.

 

[gorbilax]

Here's a few more sites you may or may not be helpful:

This one gives prices (in euros, not sure how accurate, but at least it will give you an order of magnitude):
ToyoDIY.com - https://www.toyodiy.com/parts/g_E_199411_TOYOTA_LAND+CRUISER_FZJ80L-GNPEKA.html

This has newer parts diagrams, but no prices:

TOYOTA LAND CRUISER 80FZJ80L-GNPEKA - TOOL-ENGINE-FUEL - | Japan Parts EU

TOYOTA LAND CRUISER 80FZJ80L-GNPEKA

japan-parts.eu

 

[Malleus]

Isn't working for me either, and I'm right there with you. I've been using that site for several years as I've been gradually replacing everything in my 80, and lately I've been using it pretty much weekly. It's a huge loss. PartSouq's catalog comes close as a replacement, but I really miss the direct links to Amayama, which is my preferred vendor. At least now I know it's not just me. Thanks for the post.

Email Dave Stedman at Japan4x4. Much better than Amayama.

 

[Gerrha]

I have tried most of the other sites, other than Japan4x4, which I plan to check out right about now. But I totally agree with Gorbilax. That site was so useful, and I wonder what would cause them to just shut it down. I will try to hope they are upgrading it, but likely not. The links to Amayama were very nice even though Impex has been my preferred vendor with Amayama second.

 

[84Cressida]

Not working for me either.

 

[edbods]

Nooooooooooo I thought it was just me. Amayama seems to use the same catalogs so you can at least view them there, but I just find the epc-data sites easier to navigate. I remember a few years ago they used to have a feature where you'd hover over the part number in either the diagram, or beside it, and both would be highlighted, but at some point it broke. It also seems like a lot of the toyota domestic images are stretched and the areas to click on the numbers are way out of whack.

 

[mudgudgeon]

. I remember a few years ago they used to have a feature where you'd hover over the part number in either the diagram, or beside it, and both would be highlighted

Toyodiy diagrams do this, if you have access.
You have to click, not just hover though

 

[edbods]

They don't seem to have diagrams for all models though. Some JDM models e.g. the 80s crown don't have all the diagrams.

 

[edbods]

Woooooohooooo, it's back up!

 

[Gerrha]

Just discovered it was back. Makes my life much easier.

 

[gorbilax]

@Malleus great tip about Dave. Thanks. He just helped me out with a bunch of parts. I look forward to continuing to work with him.