IPF lights

[Enigma]

I did not escape Eagle Ridge completely unscathed; one of my IPF lights mounted on my front bumper cracked along the plastic housing right at the mounting location and broke off.
It's a few years old now, picked them up from @Mud_Guppie , but curious if they offer any kind of warranty? If not, well I wasn't that impressed with them anyways, and time for one of those massive LED light bars I guess.

 

[ForealBoreal]

I have a set of IPF 930s (9") if you are interested.
They have 100/170W bulbs in them.

 

[Enigma]

Thanks, but I'll probably be hopping aboard the LED happy train.

 

[neetu]

I have a set of IPF 930s (9") if you are interested.
They have 100/170W bulbs in them.

hi are they 24v , how much for them/

 

[ForealBoreal]

12V

I do have a set of Warn SB210s in 24v though.

 

[WrenchMonkey]

Just put new 24v bulbs in them if you want 24V they are just filaments lights no electronics.

 

[ForealBoreal]

the wiring harness is 12v. Unless you make a new wiring harness up....

 

[Tmax]

the wiring harness is 12v. Unless you make a new wiring harness up....

if you like to run 24v, just go to lordco and pick up a 24v relay for $6.00 (plus the 24 v bulbs)

if you up the voltage, you will decrease the current for the same given power so no need to upgrade the wiring. it is that simple.

 

[Tmax]

I did not escape Eagle Ridge completely unscathed; one of my IPF lights mounted on my front bumper cracked along the plastic housing right at the mounting location and broke off.
It's a few years old now, picked them up from @Mud_Guppie , but curious if they offer any kind of warranty? If not, well I wasn't that impressed with them anyways, and time for one of those massive LED light bars I guess.

Jeff long time ago i noticed that your lights stick out further than the guards in your bumper. sort of a design flaw. maybe while you are at it, see if the bumper manufacture will mount things a bit further back so things wont hit them and perhaps modify yours too. LOL