Introduction and Bumper Corners for sale

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Razorbackcruiser

Razorbackcruiser

Joined
Mar 20, 2010
Threads
81
Messages
477
Location
North Little Rock, AR
What's up guys! Long time lurker first time poster (in here). Been meaning to introduce myself for awhile now but procrastination usually wins out. Anyway, I've been on a trip with a couple of you guys last year and I've also been on a few with Jayston. I've got a white 1997 LC, 3x locked, 5" lift with 38's. It's got an ARB front with a warn m12000 inside. The rear bumper is a Ironpig with 4x4 labs swingouts. There's more stuff to add but words are boring I'll just post a couple pics.



image-585525897.webp



image-2790685432.webp

I really just got into overlanding about a year ago but got hooked pretty bad. The other reason I'm posting is I have a set of steel bumper corners with swingouts I'm trying to get rid of. I got these shipped from canada from a guy that had started two sets but only finished one of them. He didn't charge me for the corners but shipping was $225+ ( I don't remember the exact cost). After I got them I finished the corners and added dual swingouts. I ran them for awhile but after I got some tax money back I went ahead and bought a full bumper. They're 1/8" steel and you'll have to drill like 4 holes, 2 in the crossmember, and 2 in the frame. Anyway here are some pics.



image-954539770.webp



image-1642816171.webp



image-748077693.webp



image-4071840008.webp



image-2569152874.webp

I don't want much for them, just really that shipping back. I'm asking $250 obo. I put a lot of hrs and bought a lot more steel to add to what he shipped me but I just want that initial investment back. You can PM me or call or text (501)551-8354. I'll be happy to show them to whoever is interested. They're a little rough but nothing a good sandblasting and paint job can't fix.

If I have put this in the wrong place or broke any rules by putting this in here then mods please delete. I plan on getting out this fall as much as humanly possible. I'm a Little Rock firefighter so I work 24hrs and am off 48 which leaves A LOT of free time so hit me up if you want to get out! I've got to get a TLC membership and then on plan on joining up if you guys approve.

Thx for reading and I hope to see you guys on the trails.

image-585525897.webp


image-2790685432.webp


image-954539770.webp


image-1642816171.webp


image-748077693.webp


image-4071840008.webp


image-2569152874.webp
 
Welcome and I'm glad you found us! I was on that "Low Water Mark" trip with you last summer.

Do your bumper corners come with the swing out arms, latches, bearings, etc?
 
Yes the latch is a destco and it holds both swingouts together and to the bumper while driving. When you open the tire side the Jerry can side is accessible by lifting a plunger type latch. The bearings are included but I'd probably replace them as they are the originals that were put on and off a bunch. They have a little play in them but are easily replaceable as TSC carries the exact size (I checked). The other side of the latch is attached to a plate that is bolted to the center of the bumper utilizing the 4 pintle hitch bolt holes in the cross member.

I'll include all the hardware but if it was me I'd go to TSC and get all new. It might cost you $5-10 and would give you some piece of mind. I'd be more than happy to help some one install them as they're a little tricky to get on. The stock resonator will have to be removed so the wing can attach to the holes where the resonator was. I took mine off and didn't notice much of a difference.

Like I said they are a little rough but would provide some decent protection on the trail. I forgot to mention that if I can't unload these in a week or two they're going to the scrap yard with some other metal I have laying around. Might be able to recoup some of that shipping cost!!

Let me know if I can answer anymore questions.
 
I'm guessing you have to be the fireman on Taylor Loop.
 
I think I have seen your rig at the fire station. Good looking rig!
 
Yeah, I was lucky enough to get assigned to the new chenal station (23) in WLR. You guys would be surprised at the number of people that have stopped to look and talk about the cruiser.

Justin was nice enough to take the bumper corners off my hands and let me tell you he's a great negotiator! Hopefully he can put them to good use. I should be getting my TLC membership soon so I can join up.

Thanks for the responses.
 
Anyone know if CLC will have a screen set up for watching SEC football again this year? That's the only way we're going to get our club firefighter ^^^to the Crawl! ;)

Might have those bumper wings on before Hot Springs. Great meeting you sir and letting me drool over your truck. VERY impressive rig. Thanks again for the deal you gave me!

**Anyone want/need a 80-Series home-fabbed inside tire carrier? Attaches to 3rd row seat bolts and the oh sh*t handle on the driver side. Has hub/studs from Slee's "stripper pole". Accommodates a 33/35/and maybe a 37" tire. Buy it for $50 obo so I can pay my RLC dues! ;)

JWP
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom