PixelWrangler
SILVER Star
- Location
- United States
I've got a spare that I won't be needing any longer. It's a Goodyear WranglerAT/S 35x12.50R15LT mounted on a 15x8 Wheel. It's got 100% tread, never seen the pavement or even been on a rig as far as I know. I bought it about 1-1/2 years ago from a guy who also had it as a spare. I had it mounted up on a wheel I got with my 40. I had the tire shop put a tube in it because I used to have problems with my spares holding air. Old habit I guess. 
Since I don't have my tire carrier built yet, the spare has always just been thrown in the back of the 40 on the floor under a packing blanket. It's even still got some of the funky blue crap stuck to the white letters.;p
Like I said, the wheel is a 15x8 - 6 on 5.5 It has 3.75" backspacing. It has some surface rust but seems to be in good shape otherwise. It fits on my back axle with Eldorado calipers just fine. On the front I would have used a 1/4" spacer to clear the 60 Series calipers and give a little breathing room for the TRE's, if I had ever needed to use the spare.
$100.00 OBO for the tire and wheel is free!
I'm in LA, West side.
Here's some pix
Since I don't have my tire carrier built yet, the spare has always just been thrown in the back of the 40 on the floor under a packing blanket. It's even still got some of the funky blue crap stuck to the white letters.;pLike I said, the wheel is a 15x8 - 6 on 5.5 It has 3.75" backspacing. It has some surface rust but seems to be in good shape otherwise. It fits on my back axle with Eldorado calipers just fine. On the front I would have used a 1/4" spacer to clear the 60 Series calipers and give a little breathing room for the TRE's, if I had ever needed to use the spare.
$100.00 OBO for the tire and wheel is free!
I'm in LA, West side.
Here's some pix
Last edited:
