Front diff info needed BJ74

[benniebez]

The front diff housing is bent on my Cruza, now there is a huge vibration toghether with the oil leak. What diff housing may work ?

From TOYODIY this is what part numbers I get on the housings.
- BJ7* 43110 - 60161 My model 1987 BJ73/4
- '87 FJ75 43110 - 60160
& 43110 - 60240
- '87 HJ75 43110 - 60160
& 43110 - 60240
- '87 FJ62 43110 - 60140
- '85 HJ47 43110 - 60122
- '87 Hilux 43110 - 35030

It seems that there is a diffirence, could it only be the mounting points or is there some major diff's between the width ?

 

[Letsgomoreplaces]

there are some differences in width between series. Hilux is totally different size diff. it needs to be 70 series and not light duty either like the LJ/RJ 70 series.

The front diff housing is bent on my Cruza, now there is a huge vibration toghether with the oil leak. What diff housing may work ?

From TOYODIY this is what part numbers I get on the housings.
- BJ7* 43110 - 60161 My model 1987 BJ73/4
- '87 FJ75 43110 - 60160
& 43110 - 60240
- '87 HJ75 43110 - 60160
& 43110 - 60240
- '87 FJ62 43110 - 60140
- '85 HJ47 43110 - 60122
- '87 Hilux 43110 - 35030

It seems that there is a diffirence, could it only be the mounting points or is there some major diff's between the width ?

 

[Radd Cruisers]

1985 - 1989 BJ, HJ and FJ7* series will work. No light duty stuff and no coil spring stuff. Needs to be a 70 series Land Cruiser HD housing.

They are a little narrower than a 60 series housing, and if you're desperate, you can cut down a 60 series housing to match the width (a machine shop can do this).

Some shops can straighten a bent housing, but it depends on how badly you have bent it. It's not too hard to do, but can take quite a bit of time to get it right.

~John

 

[Glenn-BJ74]

The front diff housing is bent on my Cruza, now there is a huge vibration toghether with the oil leak. What diff housing may work ?

From TOYODIY this is what part numbers I get on the housings.
- BJ7* 43110 - 60161 My model 1987 BJ73/4
- '87 FJ75 43110 - 60160
& 43110 - 60240
- '87 HJ75 43110 - 60160
& 43110 - 60240
- '87 FJ62 43110 - 60140
- '85 HJ47 43110 - 60122
- '87 Hilux 43110 - 35030

It seems that there is a diffirence, could it only be the mounting points or is there some major diff's between the width ?

How did you bend the front housing?