SOLD: 1985 Toyota 4Runner, completely built and bobbed with 37's
$12,000
Located in Des Moines, Iowa
Please read through my build thread for all the details and tons of pictures (Frontier 4x4's 85 4Runner weekend warrior build - Pirate4x4.Com Bulletin Board). I started building this 4Runner last winter and wheeled it all over the Midwest this past year. It has not been on the trailer once with over 5,000 miles racked up driving to and from events and locally around town. I have made several 900 mile round trip weekends loaded with all the camping gear and tools. And we don't take the easy trails, it has wheeled the hardest trails each destination has thrown at it. This truck will keep up with all the other tow rigs on the interstate and still get 19+ mpg.
The front axle is currently getting rebuilt but will be back together with new parts and ready to wheel if there is a buyer. This includes a new front axle housing, rebuilt ARB, new ring and pinion, lockouts, and new front springs. This is a very solid and clean truck with some minor trail rash. Everything works and is in excellent condition.
Please email lgraham@frontier4x4.com or call Luke at 515-441-0338 for any questions.
1985 Toyota 4Runner
Clean title
bobbed top and body
rear tube fenders
excellent paint
cage
bumpers
sliders
Drive train
22RE
rebuilt W56, Marlin HD kit
dual cases w/
4.7, 23 spline rear case
Amsoil trans and t-case fluid
twin sticks
TG HD motor mounts
TG HD t-case mounts
Sky crossmember
Wheels and tires
37x12.5x17 Cooper STT tires
17x9 MRT beadlocks
Suspension
TG front springs
All-Pro rear springs
Fox 2.0 resevoir shocks, 12" travel
CV driveshafts w/ .250 tube and
TG long spline front shaft
stainless braided brake lines
Axles
Longfeild 30 spline front axles
Longfeild hub gears
6 - pin hubs
IFS V6 calipers
1.5" front wheel spacers
vented rotors
high steer
ARP knuckle studs
knuckle ball gussets
IFS width rear axle
rear disc brakes
TG breathers
5.29 gears
ARB front locker
Spool rear
front and rear diff guards
magnetic drain plugs
Other
Corbeau RS seats
Corbeau harnesses
Vision X green led rock lights
new exhaust from manifold back w/
Magnaflow muffler and
new catalytic converter
ARB air compressor
Smittybilt XRC10 winch
Hella 500 driving lights
in cab winch controls
hand throttle
Alpine deck
This picture is older and doesn't show any rock rash.
$12,000
Located in Des Moines, Iowa
Please read through my build thread for all the details and tons of pictures (Frontier 4x4's 85 4Runner weekend warrior build - Pirate4x4.Com Bulletin Board). I started building this 4Runner last winter and wheeled it all over the Midwest this past year. It has not been on the trailer once with over 5,000 miles racked up driving to and from events and locally around town. I have made several 900 mile round trip weekends loaded with all the camping gear and tools. And we don't take the easy trails, it has wheeled the hardest trails each destination has thrown at it. This truck will keep up with all the other tow rigs on the interstate and still get 19+ mpg.
The front axle is currently getting rebuilt but will be back together with new parts and ready to wheel if there is a buyer. This includes a new front axle housing, rebuilt ARB, new ring and pinion, lockouts, and new front springs. This is a very solid and clean truck with some minor trail rash. Everything works and is in excellent condition.
Please email lgraham@frontier4x4.com or call Luke at 515-441-0338 for any questions.
1985 Toyota 4Runner
Clean title
bobbed top and body
rear tube fenders
excellent paint
cage
bumpers
sliders
Drive train
22RE
rebuilt W56, Marlin HD kit
dual cases w/
4.7, 23 spline rear case
Amsoil trans and t-case fluid
twin sticks
TG HD motor mounts
TG HD t-case mounts
Sky crossmember
Wheels and tires
37x12.5x17 Cooper STT tires
17x9 MRT beadlocks
Suspension
TG front springs
All-Pro rear springs
Fox 2.0 resevoir shocks, 12" travel
CV driveshafts w/ .250 tube and
TG long spline front shaft
stainless braided brake lines
Axles
Longfeild 30 spline front axles
Longfeild hub gears
6 - pin hubs
IFS V6 calipers
1.5" front wheel spacers
vented rotors
high steer
ARP knuckle studs
knuckle ball gussets
IFS width rear axle
rear disc brakes
TG breathers
5.29 gears
ARB front locker
Spool rear
front and rear diff guards
magnetic drain plugs
Other
Corbeau RS seats
Corbeau harnesses
Vision X green led rock lights
new exhaust from manifold back w/
Magnaflow muffler and
new catalytic converter
ARB air compressor
Smittybilt XRC10 winch
Hella 500 driving lights
in cab winch controls
hand throttle
Alpine deck
This picture is older and doesn't show any rock rash.
Last edited: