Has anyone used a refillable aerosol can to apply Fluid Film through tiny access ports in the door or frame. The 1/4 inch wand I use for the "spray gun" is too large for some of the access holes. I envision heating the Fluid Film to make it thinner and push it through a refillable aerosol can. Thanks for the feedback.
Fluid Film and refillable aerosol can
- Thread starter DahMan
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
morganism
SunkCostFallacy
maybe a small spray painter w touch up cup would have a long snout?
They sell Fluid Film in a small aerosol can also. Home Depot even carries them. They come with the thin red extension stick (a few inches long). That's what I use for those holes. Works great. There's no way you're shoving the thicker extension wand in there that's typically attached to the undercoating guns.
