Whats up guys,
after seeing the turn out at last nights meeting, i was blown away with the turnou.. i know thats not a regular occurance at your meets - so i hear, however it encouraged me to ask about some Land Cruiser help.
I figure there's someone on here that would be knowledgeable / willing to help me pull the carb, head, and help me re assemble them after they come back from re-building.
ive got a garage and tools, im quite mechanically inclined, ive just never ripped into a 2F before.
so, if any of you fellas are willing to volunteer some


time, the beer would be on me - i'd love to have some help taking the carb off to send to Jim C, and sending the head to a machine shop to have the valves redone, head decked and putting an new headgasket in there as well. normally i'd just go about this myself, but considering i dont wanna be re-doing head gaskets several times i wouldnt mind someone there to give a hand that knows how to do the job right.
any volunteers?
+ FJ60 + 
= 
Regards,
Milo
after seeing the turn out at last nights meeting, i was blown away with the turnou.. i know thats not a regular occurance at your meets - so i hear, however it encouraged me to ask about some Land Cruiser help.
I figure there's someone on here that would be knowledgeable / willing to help me pull the carb, head, and help me re assemble them after they come back from re-building.
ive got a garage and tools, im quite mechanically inclined, ive just never ripped into a 2F before.
so, if any of you fellas are willing to volunteer some




any volunteers?




Regards,
Milo