Cruisers & Co + Wholesale Automatics + HGM A750F Transmission Swap
- Thread starter Cruisers and Co
- Start date
-
- Tags
- swap transmission upgrade
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Cruisers and Co
Supporting Vendor
- Joined
- Mar 30, 2023
- Threads
- 6
- Messages
- 690
- Location
- Westminster, Colorado
- Website
- www.cruisersandcompany.com
- Thread starter
- #222
Who makes that front bumper?
Cruisers and Co
Supporting Vendor
- Joined
- Mar 30, 2023
- Threads
- 6
- Messages
- 690
- Location
- Westminster, Colorado
- Website
- www.cruisersandcompany.com
- Thread starter
- #225
That is the new @Bump It Offroad plate bumper available here TRIMEKI - https://shop.trimeki.com/
It is ultra stout and tucked up nicely. I have the very first unit on my truck and it successfully protected the truck on the rubicon this past summer. Beefy recovery points, great looks, great protection. 10/10 would recommend
Well, I know of a company that's rebuilding A343F transmissions to OEM specs...
Last edited:
Cruisers and Co
Supporting Vendor
- Joined
- Mar 30, 2023
- Threads
- 6
- Messages
- 690
- Location
- Westminster, Colorado
- Website
- www.cruisersandcompany.com
- Thread starter
- #227
Not worth it IMO
What's the benefit of an A750F over an A343F, other than an extra gear?
Cruisers and Co
Supporting Vendor
- Joined
- Mar 30, 2023
- Threads
- 6
- Messages
- 690
- Location
- Westminster, Colorado
- Website
- www.cruisersandcompany.com
- Thread starter
- #229
Please go read page 1
Bump It Offroad
Supporting Vendor
Thanks for the kind words Johnny.
@Montana Cruiser - feel free to drop us a DM. We will be at Cruise Moab with one of these as well.
Well this forum had me switch to 37s...what's next?now I gotta do 37s.....F@$ me!!!
COS80
SILVER Star
39s, obviously.
Could not find a link for the bumper.
Dang, that is one awesome looking cruiser!!That is the new @Bump It Offroad plate bumper available here TRIMEKI - https://shop.trimeki.com/
It is ultra stout and tucked up nicely. I have the very first unit on my truck and it successfully protected the truck on the rubicon this past summer. Beefy recovery points, great looks, great protection. 10/10 would recommend
Are those Nomad wheels? 16x8?
I had a hard time finding it as well, but it's there. Looks super nice.
80 Series Front Plate Bumper
Specifications 3/16” steel shell 1/4” steel for the winch plate and mounting brackets 3/4” recovery points Positions winch slightly forward, to allow for installation of C&C Intercooler Will accommodate Warn 10K & 12K winches (requires re-location kit for solenoid) Light cutouts and mounts for...
shop.trimeki.com
Last edited:
Cruisers and Co
Supporting Vendor
- Joined
- Mar 30, 2023
- Threads
- 6
- Messages
- 690
- Location
- Westminster, Colorado
- Website
- www.cruisersandcompany.com
- Thread starter
- #236
Thanks and yes those are the 16x8 nomad copperheads. They look great and one massive bonus is that it is literally impossible to tear a valve stem off with the way they are recessed
Bump It Offroad
Supporting Vendor
Apologies, I need to get that listing organized under the 80/450 section!
Thank you for finding that @Montana Cruiser !I had a hard time finding it as well, but it's there. Looks super nice.
80 Series Front Plate Bumper
Specifications 3/16” steel shell 1/4” steel for the winch plate and mounting brackets 3/4” recovery points Positions winch slightly forward, to allow for installation of C&C Intercooler Will accommodate Warn 10K & 12K winches (requires re-location kit for solenoid) Light cutouts and mounts for...
bookmarked thank you.I had a hard time finding it as well, but it's there. Looks super nice.
80 Series Front Plate Bumper
Specifications 3/16” steel shell 1/4” steel for the winch plate and mounting brackets 3/4” recovery points Positions winch slightly forward, to allow for installation of C&C Intercooler Will accommodate Warn 10K & 12K winches (requires re-location kit for solenoid) Light cutouts and mounts for...
No worries. Been in a position where I was responsible for getting listings online and messed it up several times.
Cruisers and Co
Supporting Vendor
- Joined
- Mar 30, 2023
- Threads
- 6
- Messages
- 690
- Location
- Westminster, Colorado
- Website
- www.cruisersandcompany.com
- Thread starter
- #240
1-4 and 4-1 shifts have been pretty well dialed at this point along with torque converter lockup (manual and automatic). Tomorrow we’re going to solidify the 4-5 and 5-4 shifts.
The truck moves so much easier than it did with the 343. Off the line is greatly improved and how it keeps it in the powerband is fantastic. Really excited to see what the mileage gains look like with this unit in place with the superior control
The truck moves so much easier than it did with the 343. Off the line is greatly improved and how it keeps it in the powerband is fantastic. Really excited to see what the mileage gains look like with this unit in place with the superior control