Cleaning out garage, lots of parts, come get em...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 19, 2008
Threads
259
Messages
3,755
Location
San Diego
Website
www.phalconoverland.com
I will be home pretty much all day aside from a quick trip to Home Depot and to empty oil containers. Feel free to make offers on whatever you want. Offers can take the shape of cash, parts for a 1994 FZJ80, or even tasty local IPA. I am not looking to get rich, just get rid.

Text me at 63zero-32seven-nine779 for my address in Rancho Bernardo.

There is quite a collection of parts:

Lots of transfercase gaskets, bearings, and seals for 40 and 60 series t-cases.
Misc hoses
Ujoints
FJ60 radiator - probably good
FJ60 spare drive shaft
Truck and car tire chains
Oil filters (GM 5.3L)
Marlin high steer arms and pitman + drag link
2FE alternator and misc smog stuff
Waterpump for either a 3FE or 2F, can't recall
Misc radiator caps most of which don't fit a 60 due to the diameter being too large

20161217_102447_zps3ymweb9j.jpg


20161217_102450_zpsx38tysah.jpg


20161217_102443_zpshoupcj3w.jpg


20161217_102437_zpsul3on3dj.jpg

20161217_101149_zpssiztwpax.jpg

20161217_101145_zpsahvbbv61.jpg


Receiver drier for an FJ60
20161217_100254_zpsqrjyhlgx.jpg


20161217_094415_zpsccoxyxel.jpg


20161217_093806_zpsjk8g5q6k.jpg

20161217_090914_zpsf8w0cdhe.jpg
 
Hey, don't need any of that stuff but I have a 95 that I will be parting out after the 1st if you are looking for any parts that cross over. Its at Mikes out in Ramona. Runs great, wife got hit and tweaked the frame.
Putting the engine from the 94 I bought back together next week and the following too. Full overhaul and rebuild. :)
~Pete
 
Have any pictures of the 95?
 
20161217_125336_zpsmglmpzrr.jpg
 
20161217_125803_zpsc3qsp4on.jpg
 
VZM.IMG_20161217_102343_zpskjm5jase.jpg
 
Have any pictures of the 95?
I can get you some if you want. Its a relatively stock green 95. No lockers. Its has 2.5" lift but we are pulling that to go on the new truck.
 
I don't have a lot of parts that I need as of yet. Of course that could change. Most of what I'd be interested in would be aftermarket stuff.

Frank
 
I don't have a lot of parts that I need as of yet. Of course that could change. Most of what I'd be interested in would be aftermarket stuff.

Frank

Sounds good. Let me know if you want to take a look at the torn apart 94. We are in the midst of putting the engine back together now.
You are welcome to swing by.
~Pete
 

Users who are viewing this thread

Back
Top Bottom