Can tintable raptor liner be tinted white?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 9, 2005
Threads
27
Messages
438
Location
Michigan
Can the tintable Raptor Liner be tinted to match the nearly-white LX450? Or is the base color of the liner too dark to start with?
 
Believe that I have seen it done before with good results. Any reason why you want Raptor Liner vs. Monstaliner or AlsLiner?
 
It's honestly been a long while since I researched DIY bedliners. When I last looked into it, the Raptor liner seemed popular. I don't know if Monstaliner even existed then. I live in the rust belt and need to get some areas of my truck under control before they get out of hand.

I would be interested in Monstaliner tinted to match my LX450. It looks white until you put it side by side with pure white, then you can clearly see that it's not. I could pull off the gas filler door for a couple weeks if needed to develop the color.

Delancy - If the Monstaliner color chip matches your LX, I'd be interested in seeing it too. If not, we can try to see if Magnetman would develop the colormatch.
 
Sorry Delancy, I left the envelope in my office mailbox but apparently the clerk hasn't been around to our office in a few days. I will drop it in a box this afternoon/evening. Sorry for the delay.
 
Delancy - If the Monstaliner color chip matches your LX, I'd be interested in seeing it too. If not, we can try to see if Magnetman would develop the colormatch.

Will advise and send for a second opinion, regardless of my appraisal.


Sorry Delancy, I left the envelope in my office mailbox but apparently the clerk hasn't been around to our office in a few days. I will drop it in a box this afternoon/evening. Sorry for the delay.


No worries. I appreciate you sending and not in a hurry, anyway.

Soaking this up until Sunday, anyway.



image-1542420750.webp

image-1542420750.webp
 
I know this post is a little old but I have my exterior lined with Raptor liner matched to the factory white color. It was done about three years ago and is holding up well.
 

Users who are viewing this thread

Back
Top Bottom