Best way to repair this?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 5, 2016
Threads
16
Messages
221
Location
Bay Area, CA
I plan on brushing off all of the rust as best I can and then prepping with the solvents that come with the POR kit. I then planned on using OEM touch up paint on top of the metal.

Is there anything I am missing? I assume I'll have to take off all the loose paint chips as best as possible. Any help would be appreciated. Haven't had to do something like this before and the damage seems pretty bad.

dA8B4bj.jpg
 
I usually use touch up paint on small chips. Not sure what you expectations are by that will require a bit more work.

Temp rust prevention - I would clean the rust off, remove the loose paint and tape the area off. I would then spay several coats of auto primer on the bare metal.
 
I usually use touch up paint on small chips. Not sure what you expectations are by that will require a bit more work.

Temp rust prevention - I would clean the rust off, remove the loose paint and tape the area off. I would then spay several coats of auto primer on the bare metal.
That's what I was suspecting. Thanks.
 

Users who are viewing this thread

Back
Top Bottom