BellFab x Vans Bike Grip Shift Knobs are back!

[Bellfab]

We Decided to bring back our Bike grip shift knobs.

We had a ton of fun with these the first time around and since they went out of stock we have been getting quite a bit of interest.

They are universal with M12x1.25 threads so they fit the 80/100 transfer case and a ton of other stuff.

The Vans grip is included and now available with 3 Grip colors: Gum (shown in photos), Black and OD Green. You can also order without a grip if you have something else you'd like to use.

Whether you're a fan of ours, the shoes, bikes or just like the extra leverage of the longer shifter these are a fun little ad-on to your interior.

Available here- Bellfabrication.com

 

[NeverFinis]

When vendors post, I like to check out what else they sell.

I was researching water containers today for an upcoming trip, and ran across the 11L Dometic Water Jug. It is one that I am considering.

Lo and behold, you make a mount!

 

[Bellfab]

When vendors post, I like to check out what else they sell.

I was researching water containers today for an upcoming trip, and ran across the 11L Dometic Water Jug. It is one that I am considering.

Lo and behold, you make a mount!

We do! The Dometic jugs are definitely a solid option. We run them in a few different rigs over here. Happy to answer any questions you might have about the mount or water jugs.

 

[dbbowen]

Just in case someone wants the best mtb grip in existence. Will work perfectly with these belfab shifter knobs...

With Flange (more rad):

DMR DeathGrip Race II Flanged Lock-On Grips

DMR DeathGrip Race II Flanged Lock-On Grips :: From $27.00 :: DMR Lock On Grips

www.universalcycles.com

Without flange

DMR DeathGrip Race II Flangeless Lock-On Grips

DMR DeathGrip Race II Flangeless Lock-On Grips :: From $27.00 :: DMR Lock On Grips

www.universalcycles.com

 

[NeverFinis]

We do! The Dometic jugs are definitely a solid option. We run them in a few different rigs over here. Happy to answer any questions you might have about the mount or water jugs.

Still researching but I measured the spot today where I would like to put it, and it is too narrow by a few inches. Looking at either something cheap on Amazon that will fit, or maybe a LifeSaver Jerrycan. I will have to research an inside mount for the latter.

 

[Bellfab]

Still researching but I measured the spot today where I would like to put it, and it is too narrow by a few inches. Looking at either something cheap on Amazon that will fit, or maybe a LifeSaver Jerrycan. I will have to research an inside mount for the latter.


View attachment 3860019

It might fit sideways there. Its 8" deep with the latch. We also make a jerry can mount that 8" wide. Just a couple options.

 

[NeverFinis]

8"?

I had to go back to Dometic...

What is odd is that I was going by this picture on Dometic website,

Which shows 9 1/4" width.

I did more digging and in specifications it shows 7" width.

Ok, 8" for the mount makes sense..

I will make a more accurate measurement, and also check out your Jerry Can mount.

Thanks for the reply!

 

[NeverFinis]

@Bellfab

Would you mind giving me the W * L * H of your jerry can mount? I am leaning towards this, but wondering if I can put it inside vs on the bumper.

Also the Length of the Dometic mount?

Thanks!

 

[Bellfab]

@Bellfab

Would you mind giving me the W * L * H of your jerry can mount? I am leaning towards this, but wondering if I can put it inside vs on the bumper.

Also the Length of the Dometic mount?

Thanks!

Sent a PM

 

[Pistol Pete 85]

We Decided to bring back our Bike grip shift knobs.

We had a ton of fun with these the first time around and since they went out of stock we have been getting quite a bit of interest.

They are universal with M12x1.25 threads so they fit the 80/100 transfer case and a ton of other stuff.

The Vans grip is included and now available with 3 Grip colors: Gum (shown in photos), Black and OD Green. You can also order without a grip if you have something else you'd like to use.

Whether you're a fan of ours, the shoes, bikes or just like the extra leverage of the longer shifter these are a fun little ad-on to your interior.

Available here- Bellfabrication.com

View attachment 3859197View attachment 3859199
View attachment 3859213View attachment 3859216

Really cool mod. I’m glad I ordered but for the price you could have put the grip on for me.