83 fj60 norcal

[orangefj45]

just got this from megolfer for parts, the rest needs to find a good home. i will be parting this rig out this sunday. so if you need something, speak up cause on monday the rest is going to the scrap yard.

body has rust, some panels are good. the doors and rear quaters are junk.

truck is located in stockton CA right off hwy99. i can ship smaller items ( my rule is: if i can carry it in one hand, i'll ship it ). larger items will need to be picked up in person or mud shipped. i have a forklift at the shop so loading things up is not an issue.


only items left:

radiator
smog stuff
drive shafts
rad shroud

 

[meat]

starter, coil/igniter, power steering pump

Want starter, coil/igniter, powersteering pump if avail w/ shipping to 98045. Steve

 

[orangefj45]

pm'd

 

[cruiser_guy]

Does it have the headlight washer relay?

 

[orangefj45]

i'll check on sunday. if it does, i'll pull it for ya charles. i guess i'll stash it with the 55 bumper for you.

 

[lvcruiser]

Brake line

Georg,

do you have this brake line and will it work on my 40? if so please let me know how much with shipping to 89129.
Thanks,
Brandon

 

[cruiser_guy]

i'll check on sunday. if it does, i'll pull it for ya charles. i guess i'll stash it with the 55 bumper for you.

Sounds good!! Any non-USA parts I can bring up for you?

 

[Cruiserdrew]

How is the tail gate?

edit--The lower one.

 

[orangefj45]

Georg,

do you have this brake line and will it work on my 40? if so please let me know how much with shipping to 89129.
Thanks,
Brandon

hey brandon.
thanks for the reply. the truck has some rust. i would not use the brake lines for anything, nor would i ever sell a used brake line unless it's absolutely mint and unobtanium. even then i'd give it away.......

have you tried the local dealer? you'd be amazed how much of that stuff is still available and how reasonably priced the brake lines for a cruiser are. i get new ones from the dealer all the time when i do disc brake conversions.

 

[orangefj45]

Sounds good!! Any non-USA parts I can bring up for you?

a 1HZ or 1HDT would be nice! i'll even let you adopt me if you bring me one of those for x-mas!

thanks for the offer charles, if i can think of anything, i'll get back to you. when are you heading back up this way?

 

[orangefj45]

How is the tail gate?

edit--The lower one.

upper good, lower crap, sorry.

 

[Butt Ugly Chuck]

Georg,
Wiper linkage? Or at least the plastic bushing thingy where the motor mates to the arm? Mine gots the slop!
Butt

 

[cruiser_guy]

a 1HZ or 1HDT would be nice! i'll even let you adopt me if you bring me one of those for x-mas!

thanks for the offer charles, if i can think of anything, i'll get back to you. when are you heading back up this way?

I'm sure I could find a 1HZ equipped bare bones '80 here. The 1HDT would be tougher to find except in a '100 series. The problem is Uncle Sam would not look too kindly on either of those coming in and Kalifornia would have a fit!! As much as I might like to bring you one for Christmas our budget won't allow it

We'll be through in the summer of '09 again.

 

[orangefj45]

Georg,
Wiper linkage? Or at least the plastic bushing thingy where the motor mates to the arm? Mine gots the slop!
Butt

should'nt be a problem.

 

[Cruiserdrew]

should'nt be a problem.

If Georg's is also worn out, the linkage is still available from Toyota. I got one last year.

 

[Butt Ugly Chuck]

Georg,
Wiper linkage? Or at least the plastic bushing thingy where the motor mates to the arm? Mine gots the slop!
Butt

should'nt be a problem.

Nuther one Georg,
Are the bell crank assemblies from this rig in serviceable shape?
Butt

 

[orangefj45]

for the wipers? one way to find out; i'll pull them today and will get back to you.

 

[Butt Ugly Chuck]

Nuther one Georg,
Are the bell crank assemblies from this rig in serviceable shape?
Butt

for the wipers? one way to find out; i'll pull them today and will get back to you.

Sorry,
I meant bell cranks for the parking brakes. Chances are they're frozen solid but thought I'd check anyway.

 

[toyman317]

I need accelerator/throttle linkage. Price to Indy 46220?

 

[Red Fox Ranch]

What kind of shape is the hood release cable in? Interested in that shipped to Utah, 84405, thanks Georg.

Kaleb