80 93-97 series drivers side floor harness

[Tank5]

Vehicle Model

1. 80 Series

I am looking for a harness section out of a 93-97 80 series. The section I am looking for is the driver side floor harness from the kick panel junction to the junction before the tail lights. It needs to have the wiring to support factory Elockers.

I am under the impression that some 80 series may have come pre wired for Elockers even though there did not have lockers.

If you have one please let me know.

 

[mesa man]

 

[REKCUT]

May be wrong but the locker section in my experience runs from the center console shifter back along the drivers side and back to the tail lights. I dont know of any 80s that were not locked that included this but there may have been. I am under the impression that all LX450’s came prewired for lockers regardless of having lockers or not.

 

[REKCUT]

Good info here

FJ80 OEM Front Diff Locker Wiring Harness Part Number

Somehow something got up above my front axle and destroyed the harness between the plugs. Naturally, it happened when my son borrowed the truck, so I have no idea what happened. I can certainly rebuild it myself, but I have so many projects on the docket I thought I better have a look at how...

forum.ih8mud.com

 

[Tank5]

May be wrong but the locker section in my experience runs from the center console shifter back along the drivers side and back to the tail lights. I dont know of any 80s that were not locked that included this but there may have been. I am under the impression that all LX450’s came prewired for lockers regardless of having lockers or not.

The harness section I am getting from @mesa man is out of an LX.

Interesting though all the wiring from the Elocker harness I took apart came out of the driver LH side floor harness. This harness does connect under the console but I don’t recall that those connections have anything to do with Elockers. I believe the primary connections all run through the driver kick panel connection from the main dash harness where the Elocker ecu run through, selector switch, and transmission relay.

 

[Tank5]

@mesa man hooked me up with what I needed. No longer looking.

Thank you