Price Dropped to $22,800....new truck coming, ready to sell!
TRUCK IS SOLD!! THANKS @spitfire11
Just ordered a new 2016 Trail Edition Premium, so my current 4Runner Trail Edition is up for sale, officially!
The new truck willtake about 6-8 weeks to come in be delivered here 11/18-11/22 according to the dealer. Current mileage is right around 130,000.
It has always been serviced by the dealership (all receipts inc.), including the lift install, and only ever used Toyota parts. I did just put on new front calipers and rotors.
Here's a list of the mods to date...
- 3" Toytec Lift, heavy duty rear spring
- Light Racing UCA's
- Light Racing Heavy Duty Rear Links
- Airlift 1000 airbags in rear springs, fill ports on inside of hatch corners, protected from the elements
- ARB front bumper, featuring 2-OPT 7 10" LED's, an 8,000 lb Ramsey Winch with Southeast Overland's synthetic line and thimble and in cab controller, all new solenoid kit replaced this summer, comes with plug in winch controller.
- Group 31/34 AGM Sears dual batteries
- NoCo 10 amp charger to keep batteries top off and maintained, includes NoCo weather proof plug in front bumper
- Engine block heater, includes NoCo weather proof plug in front bumper
- Remote Start (not Toyota)
- Rocky Road Sliders
- Gobi Rack, with Mounts for a 4 gallon Rotopax, included in the sale, the rack also includes an ARB 8' awning, mounted on custom made brackets that hold a 5' Hi Lift Extreme, Hi Lift not included. Rack also mounted has a 30" OPT 7 LED bar
- Rigid LED floods cut intro lower bumper, Phantom LED mounted to rack on the top, separate switch in cab
- LED's cut into hatch lifting hand holds, for exterior rear lighting when hatch is lifted
- The famous @Antman cup holder mod cut into rear bumper (adds $2000 to asking price)
- RCI Aluminum Skids, and A arm aluminum skids as well
- Custom made drawer 2 drawer system in the back, mounted to the pull out tray
- The rear of the truck features 2 separate refrigerator circuits, and dual USB ports on either side
- Weather proof 12v fused outlets on each front fender, which reaches the GoPro mount on the front bumper
- Always ran Bridgestone Revo II's A/T, current tires have 35,000 miles on them Load Range E
Probably forgetting a few things, but all in all this has been a commuter vehicle all it's life, with a bout a 90 mile a day round trip. Brakes replaced about 75,000 I believe. There's a few light scratches and some light nicks, and a couple scuffs on the wheels. This is a non-KDSS truck. Everything works as it should.
Selling price $22,800
I will be at The Vermont Overland Rally in October if you want to see it.
Some pictures...
Thanks for looking, PM with any questions, I'll supply cell
TRUCK IS SOLD!! THANKS @spitfire11
Just ordered a new 2016 Trail Edition Premium, so my current 4Runner Trail Edition is up for sale, officially!
The new truck will
It has always been serviced by the dealership (all receipts inc.), including the lift install, and only ever used Toyota parts. I did just put on new front calipers and rotors.
Here's a list of the mods to date...
- 3" Toytec Lift, heavy duty rear spring
- Light Racing UCA's
- Light Racing Heavy Duty Rear Links
- Airlift 1000 airbags in rear springs, fill ports on inside of hatch corners, protected from the elements
- ARB front bumper, featuring 2-OPT 7 10" LED's, an 8,000 lb Ramsey Winch with Southeast Overland's synthetic line and thimble and in cab controller, all new solenoid kit replaced this summer, comes with plug in winch controller.
- Group 31/34 AGM Sears dual batteries
- NoCo 10 amp charger to keep batteries top off and maintained, includes NoCo weather proof plug in front bumper
- Engine block heater, includes NoCo weather proof plug in front bumper
- Remote Start (not Toyota)
- Rocky Road Sliders
- Gobi Rack, with Mounts for a 4 gallon Rotopax, included in the sale, the rack also includes an ARB 8' awning, mounted on custom made brackets that hold a 5' Hi Lift Extreme, Hi Lift not included. Rack also mounted has a 30" OPT 7 LED bar
- Rigid LED floods cut intro lower bumper, Phantom LED mounted to rack on the top, separate switch in cab
- LED's cut into hatch lifting hand holds, for exterior rear lighting when hatch is lifted
- The famous @Antman cup holder mod cut into rear bumper (adds $2000 to asking price)
- RCI Aluminum Skids, and A arm aluminum skids as well
- Custom made drawer 2 drawer system in the back, mounted to the pull out tray
- The rear of the truck features 2 separate refrigerator circuits, and dual USB ports on either side
- Weather proof 12v fused outlets on each front fender, which reaches the GoPro mount on the front bumper
- Always ran Bridgestone Revo II's A/T, current tires have 35,000 miles on them Load Range E
Probably forgetting a few things, but all in all this has been a commuter vehicle all it's life, with a bout a 90 mile a day round trip. Brakes replaced about 75,000 I believe. There's a few light scratches and some light nicks, and a couple scuffs on the wheels. This is a non-KDSS truck. Everything works as it should.
Selling price $22,800
I will be at The Vermont Overland Rally in October if you want to see it.
Some pictures...
Thanks for looking, PM with any questions, I'll supply cell
Last edited:
