FNWheels
Supporting Vendor
Hi Everyone,
It's been a little while since we've done a production run of 18x9" +25 5x150 FX Pro wheels, and we weren't planning on producing more until early 2026.
One of our Tundra customers is trying to get a group buy going for our 18" FX Pro flow formed wheels over on the Tundra forum so that we might possibly be able to start production up earlier than we had planned. I thought it might be a good idea to see if there's any interest here among 200 series owners as well.
This is the link to the post on the Tundra forum:
www.tundras.com
What we're offering is to maintain current, pre-tariff pricing for one more production run (we'll absorb the tariffs), which is $1,349 / set of four or $1,686.25 / set of five including shipping anywhere in the contiguous 48 states.
Additionally, if we are able to get deposits for at least 10 sets (per part number), we'll offer a discount of $12.50 per wheel ($50 / set of four or $62.50 / set of five wheels).
Most of the interest thus far has been for matte black, but we have also offered this wheel in the past in matte bronze, matte gunmetal and high gloss dark gunmetal.
We're planning to begin asking for 10% deposits in approximately one to two weeks. We'll leave the window open for up to two (2) weeks, after which time the pre-order / group buy discount will no longer be available. We're working with very slim margins for this deal, and we don't expect to be able to offer this pricing again unless there is a dramatic roll back in the Section 232 tariffs on aluminum products.
If any Mud members are interested in leaving a deposit, or if you have any questions, please contact me directly or reply to this thread with your questions or requests. I'm more than happy to help.
Thank you IH8Mud members for your consideration!
-Dustin
FN Wheels
(951)735-1100 - Office
(714)390-9387 - Cell (call or text)
FNWheels@gmail.com
www.fnwheels.com (new website coming soon)
Width: 9″
Offset: +25mm
Backspacing: 6″
Bolt pattern (PCD): 5x150mm
Center bore: 110.2mm (Toyota hub centric)
Load rating : 2,500lbs+ per wheel
Wheel weight : 26.2lbs (approximate)
Certification: JWL-T, VIA, DOT and SAE J-2530
Colors: Matte black (standard). Matte gunmetal, matte bronze and high gloss dark gunmetal are also available by special order.
Center cap: Plain, color matched cap included. FNW cap or FN Wheels Flow Formed logo caps are available upon request as well.
Additional notes/features: These ƒ(x) Pro wheels have been manufactured from high purity 6061 T6 aluminum alloy using an advanced flow forming method with an emphasis on maintaining a high strength to light weight ratio. No compromises were made when we developed these wheels for your Landcruiser, Sequoia or Tundra. All wheels have been tested to the strictest testing standards possible with an emphasis on maintaining the load rating with oversized tires. The lug holes have been drilled to accept extended thread (ET shank) lug nuts for maximum thread engagement on short, OEM Toyota wheel studs.
Matte Black:
Matte Bronze:
Matte Gunmetal:
High Gloss Dark Gunmetal:
One more note about widths and offsets:
18x9" +25 is the most popular fitment for this wheel in the 5x150 bolt pattern, however we can also produce the wheels in 18x8", 18x8.5" or 18x9" with different offsets (up to 18x8.5" +30 or 18x9" +35). Our factory minimums are 40pcs per spec (part #), which means that all 40 wheels would need to be the same diameter, width, offset, bolt pattern, center bore and color. As of the date of this post (July 3, 2025) the most requested option has been 18x9" +25 5x150 in matte black.
It's been a little while since we've done a production run of 18x9" +25 5x150 FX Pro wheels, and we weren't planning on producing more until early 2026.
One of our Tundra customers is trying to get a group buy going for our 18" FX Pro flow formed wheels over on the Tundra forum so that we might possibly be able to start production up earlier than we had planned. I thought it might be a good idea to see if there's any interest here among 200 series owners as well.
This is the link to the post on the Tundra forum:

FN Fx wheels, who is interested?
Hello all! I was speaking with Dustin at FN wheels. They make very high quality wheels, flow form, hub centric. Checks a lot of boxes. High quality...

What we're offering is to maintain current, pre-tariff pricing for one more production run (we'll absorb the tariffs), which is $1,349 / set of four or $1,686.25 / set of five including shipping anywhere in the contiguous 48 states.
Additionally, if we are able to get deposits for at least 10 sets (per part number), we'll offer a discount of $12.50 per wheel ($50 / set of four or $62.50 / set of five wheels).
Most of the interest thus far has been for matte black, but we have also offered this wheel in the past in matte bronze, matte gunmetal and high gloss dark gunmetal.
We're planning to begin asking for 10% deposits in approximately one to two weeks. We'll leave the window open for up to two (2) weeks, after which time the pre-order / group buy discount will no longer be available. We're working with very slim margins for this deal, and we don't expect to be able to offer this pricing again unless there is a dramatic roll back in the Section 232 tariffs on aluminum products.
If any Mud members are interested in leaving a deposit, or if you have any questions, please contact me directly or reply to this thread with your questions or requests. I'm more than happy to help.
Thank you IH8Mud members for your consideration!
-Dustin
FN Wheels
(951)735-1100 - Office
(714)390-9387 - Cell (call or text)
FNWheels@gmail.com
www.fnwheels.com (new website coming soon)
FN Wheels ƒ(x) Pro Flow Formed
Diameter: 18″Width: 9″
Offset: +25mm
Backspacing: 6″
Bolt pattern (PCD): 5x150mm
Center bore: 110.2mm (Toyota hub centric)
Load rating : 2,500lbs+ per wheel
Wheel weight : 26.2lbs (approximate)
Certification: JWL-T, VIA, DOT and SAE J-2530
Colors: Matte black (standard). Matte gunmetal, matte bronze and high gloss dark gunmetal are also available by special order.
Center cap: Plain, color matched cap included. FNW cap or FN Wheels Flow Formed logo caps are available upon request as well.
Additional notes/features: These ƒ(x) Pro wheels have been manufactured from high purity 6061 T6 aluminum alloy using an advanced flow forming method with an emphasis on maintaining a high strength to light weight ratio. No compromises were made when we developed these wheels for your Landcruiser, Sequoia or Tundra. All wheels have been tested to the strictest testing standards possible with an emphasis on maintaining the load rating with oversized tires. The lug holes have been drilled to accept extended thread (ET shank) lug nuts for maximum thread engagement on short, OEM Toyota wheel studs.
Matte Black:
Matte Bronze:
Matte Gunmetal:
High Gloss Dark Gunmetal:
One more note about widths and offsets:
18x9" +25 is the most popular fitment for this wheel in the 5x150 bolt pattern, however we can also produce the wheels in 18x8", 18x8.5" or 18x9" with different offsets (up to 18x8.5" +30 or 18x9" +35). Our factory minimums are 40pcs per spec (part #), which means that all 40 wheels would need to be the same diameter, width, offset, bolt pattern, center bore and color. As of the date of this post (July 3, 2025) the most requested option has been 18x9" +25 5x150 in matte black.