two questions that are probably simple for you more experienced guys.
My LJ78 has some oil leaking around the top of the engine. I see this plunger on the throttle body and it seems to be coming out there, at least partly. Can anyone explain the function of this and potential fix?
Also, some...
^^^as stated. Looking for decent condition fairly priced fj62 3FE throttle cable. my fix is borrowed time at best and this is my daily driver. Also interested in junk cables for housing thimbles for use in potential reproduction cable prototypes...Please let me know.
On port "R" of the throttle body.. I would love to know how many inches of vacuum I should be reading at 3000 rpm? The FSM does not specify except to state vacuum.
I believe I have something blocking the port and it is NOT carbon. Maybe a broken wire or something similar from a previous...
Hi there
I have a 1976 FJ 45 that I have installed a 13BT in
drove it last summer and it worked nice
this winter I plumbed up a air to air
and changed the way the throttle cable worked on the original 13BT setup
is there a 40 series throttle cable from the pedal to the engine that is about 40...
I got a fj62 for $600 ... But the kickdown cable from the throttle to the transmission is broken ... I need a new or used one .. Try several sites and no luck .
Please somebody tell me where I can find one ..
Have a new never installed Lokar throttle cable. Comes with packaging and instructions. Removed from packaging to look at and never installed, sold project. 36" long Lokar Part #TC-1000U36
$30 shipped
My truck has not been herself after a HG replacement last year. Like a Land Cruiser should, it still fires up each time, and plugs along like champ. I know how this engine feels when its happy, and it is not there yet.
I wanted to check the TPS sensor, since I am not certain if it was checked...
So I'm getting an error code 41 from my O/D light, and I don't have torque converter lockup since my injection pump rebuild.
The Error Code 41 is: Throttle Position Sensor. I did the resistance test on it and it ohms out ok. The wiring harness seems ok, and I've already (foolishly) replaced...
Recently I've been experiencing occasional high idle on a 2F with stock carb and linkage. It would be noticeable after having been driving then with the clutch in as the idle would be sticking at 1500-2000 rpm. Lifting under the throttle pedal or tapping it would drop the idle to normal...
I'm 200 miles from home, hauling a trailer and havin a great time when suddenly while pressing the gas the pedal locks out at the floor and won't budge. Strange thing is that instead of going full blast the carb is sitting at about 1400RPM worth of fuel flow. I pull off in a little town called...
In need of some help... so the PO of my truck jerry rigged the throttle valve solenoid on the carb. I'm installing a trollhole carb and need to get this straightened out so I can install the carb and do a valve adjustment.
They spliced the solenoid directly into the harness, so I don't have a...
I just got halfway thru a TPS check and it started pouring rain.
I checked the fully closed and fully open positions. They are within spec.
My question, has anyone ever heard of TPS being partially out of spec?
My guess would be yes, but ...
Thanks
Next and hopefully last small issue to diagnose and fix on our new GX.
At highway speeds when I transition from very light throttle to no throttle or the opposite I get a noise / slight vibration like hitting a rumble strip only much much quieter. It happens more going from on to off throttle...
I need a linkage-style gas pedal (late 70's) that includes the manual throttle extension piece at the top. Like this one...
I'd even take some of the other linkage pieces...
I've got a USA forwarding address, so shipping is easy for those stateside.