throttle

My engine was rebuilt in the fall of 2021 and I installed a supercharger in the fall of 2022. After installing the supercharger, normal operation has been great however under WOT the transmission shifts at 3400 rpm (PWR not engaged). I've adjusted the throttle cable (kickdown) based on...

Need some help. I decided to replace the Weber that was on my 86 FJ60 with a Jim C rebuild. Luckily I had all the linkage and choke cable still. I made sure to double check the desmog doc to make sure there is nothing missing before putting the OEM on. Unfortunately, what once was a...

I want to add one to my incoming ('95 HZJ75) Troopy. I have found an OEM cruise control - (SORRY! hand throttle cable) - is that all I need? Is there a floor pedal specifically for the hand throttle?

So I just had a thought, if you accidentally indexed the throttle lever on a rotary pump off a tooth, so you had to turn up the fuel to get it to idle, could that cause black smoke and a 'weird' feeling throttle pedal like it not being able to rev high enough even though the max stop is all the...

About 2 years ago I got a P0120 code (interestingly this was when I was playing with the transmission kickdown cable) right before a trip and decided to just buy a new TPS and be done with it, and that seemed to have worked, until the last few months. Now I am getting a P0120 code...

I just returned from a ~1,500 mile round trip and fought this issue nearly the entire time. I'm getting a strange rumble or vibration when the gas pedal is at a very specific position. It almost feels like running over shoulder rumble strips, but not quite as extreme. It's a full car vibration...

Ok in the video is exactly what it's doing and I'm unsure why the carb is making the hissing sound and running rough. It's been running really well lately, but recently it's been giving me problems running and accelerating. It may be fuel or spark I not really sure. On the fuel side of things...

I have a 3BII with rotary pump and am looking for ideas and suggestions to improve the current setup which works but provides limited travel. The foot pedal pushes a vertical ready rod that rotates a spring to pull a cable which pulls another rod to rotate the throttle on the rotary pump. The...

Hey everyone, I have been fixing up a 1995 that I inherited from my family. One of the issues is a low idle when the engine is warmed up (Around 200-300rpm). It also drops revs when turning the wheel. This morning I got the P0510 code so I am planning on removing the throttle body, cleaning...

Hi all, Apparently Missing a part as I go back and put the machine back together. Taking a photo now, it’s the pivot point for the throttle on the 60. Using an aftermarket carb as well, If I can’t find it think I might try a cable linkage setup.

Hi anyone have this bracket original or aftermarket?

Possibly for the FAQ: This week I installed the Toyota Hand Throttle in my 96 LC so I can keep the RPM up for winching, jump-starting, and in my immediate need, keeping the RPM up while allowing my LC to warm up and circulate distilled water for a coolant flush sitting in the driveway. I...

Hey Guys, first time on one of these things so here goes! I am nearly at the end of a build, putting a 1H motor into a 77 FJ45 body one thing I cannot work out is how to hook up the throttle. I have just ordered a diesel accelerator cable as the petty cable won't work, I have maybe some/all of...

Hey mudders, Having what I believe is a throttle position sensor issue, but I’m not sure... Here’s what’s going on: My car started and was running fine per usual, then I hopped on the interstate and floored it hard until I reached about 85mph. I turned off of the interstate and floored it...

looking for the circled pedal channel, trying to add a hand throttle to 60. They are the same on 60 and 62 from 1980-1990. Thank you Marc

I just got a 1997 land cruiser! Previous owner had a shop do all the work. However, there's lots of little things that were left unfixed. So, I have read the threads about adjusting the TPS with feeler gauges. However, since I'm a 97, i just used a scanner to read TP %. At idle, it reads 9%. At...

Hey All, I recently got an entire throttle body from a junkyard that was from a 02' Sequoia. Everything looks the same as my 98 LX470 throttle body, except for this metal screw in pipe (as pictured) that is in addition to the regular body. Can you guys tell me if I can just go ahead and unscrew...

Hey fellas! I'm continuing my way down through Southamerica in my FJ62 and have made it to Ecuador this far. No breakdowns this far but... The engine is acting a little weird. I am driving in 3000 metres currently but it has been going on for a while and I can't find any explanation. My...

loiking for ideas in throttle cable on my SBC with FITech. Love the set up but the routing for cable is not optimal and she is getting a bit sticky off idle. Really noticed at 'crawl last weekend. I can pull her and soak it, or put a new cable in. What are you others using? Marc

Mine suddenly broke, and they're expensive online. Anybody have an extra throttle cable for any reason? Thanks! (Weber carb)