Hi All - bought a 2000 LX470 a few weeks ago, 105,000 miles, and rode very spongy on highway when headed out of town. Seemed to bounce out of dips in the road and just didn't feel good. Just installed new OEM struts, better but not great. Did the AHC H-L test, and only 3-4 level difference -...
Hey all, been trying to chase down a problem on my 07 GX
I was on the interstate last week and experienced what felt like someone grabbing the wheel and pulling it hard and to the left and holding it. I had to fight to keep the rig straight. It would do this for a minute or so then stop. Then...
The stock suspension feels like a boat and doesn’t seem to be smooth over harsh roads in town. Vehicle (2021 HE) is currently stock with stock tires, wouldn’t mind lifting if it will improve the ride.
Any recommendations on a suspension set up that isn’t as floaty and smoother over harsh...
2004 GX470. I just replaced the air bags and rear shocks about a week apart (bags first). AFTER installing the shocks, the CEL came on triggering the VSC TRAC and VSC OFF dash lights. Everything came out much easier than I was lead to believe by the mechanic and went in even easier. I double...
Springs, Ubolts are original to the truck. I replaced the shocks with new OEM shocks a few years back. Shocks have ~2500 miles.
looking to accept any reasonable offer. Don’t need or want.
located in the South Bay Area California.
Greetings all!
First Land Cruiser, 2001 with 238k miles, bought a few months ago. I've been reading this forum since, and have replaced timing belt, water pump, heater T's, plugs and valve cover gasket, as well as new leather on front seats. I am now on a quest to fix the suspension. I've read...
Hey all, newbie here. I recently purchased a 2019 200 series with an Ironman foam cell pro kit installed. It has a stage 3 kit but the upper and lower rear trailing arms are not installed and brand new in the box.
The issue is, when you accelerate hard it pulls to the right. It coasts and...
Long story short, I replaced the speedo cable over the weekend and while I was under the cruisier a quick inspection of the suspension revealed the spring pin bushings were totally disintegrated, and all the shackle bushings are in bad shape which probably explains all the road noise and rattle...
For the life of me I don't remember what side this backing plate came from but I do know it's from the front axle of a 96 80 series. It's in good shape needs cleanup. Price $20 buyer pays shipping best to email me shmukter@pa.metrocast.net
I am taking a look into upgrading the suspension on a lower mileage 2016 LC 200. I have an opportunity to get an Icon Stage 6 2.5-3.5 setup installed at a solid bargain and was wondering who has experience with this suspension setup and what your ownership experience has been like. My LC has...
Was the rear air suspension on the GX470’s an option or standard equipment?
I ran across a very much stock 2005 GX470 and there’s no air/suspension control panel. Just one of those small pockets. From talking to the owner, they didn’t have any idea. Of course, they’re not the original owners...
I've got an H55 with 33's in my 1984 FJ60 and running stock 3.73's and would like to replace them with 4.11's. If anyone has a set of 4.11 thirds they want to sell or swap, I would love to buy or trade. If you have a set of locked thirds, that is even better. I'm in Georgia, but willing to...
Hi Folks,
I picked up an LX470 earlier this year, and was jacking up the front to remove the wheel. I noticed that my passenger wheel was off the ground, but the driver side was still planted. I am still running factory AHC without any issues. I did not measure it, but I would say the...
I have a dobinson kit for my HDJ81. I am wondering if I will need extended brake lines or anything else. If I do can someone send me a link? I also do need to replace my brakes and maybe my rotors. If someone could link stock HDJ81 front and rear brake pads + rotors that would be greatly...
No leaks or issues. Just removed this week. $400 firm local pickup, cash. I drove the car and there were no whines, leaks, bubbles or other problems.
Shipping, due to weight is about $70, I will shop for best price but shipping has become outrageous lately.
No shipping outside 48 states...
98-99 front lower and upper bare, used control arms, new bushings, spacers, and stoppers(all OEM) New upper and lower front 555 ball joints. $1,200. Includes shipping.