suspension

Hey everyone, Hoping to learn from some of the more experienced folks here — I’m experienced enough with my rig to know when something feels different but when it comes to suspension systems, I am way out of my depth. I have a 2014 LX 570 with stock AHC (which I love), around 96k miles, and...

Did a castor offset bushing installation yesterday with no center to center measurement using this jig, it fits the bushings like a glove. HINT... Important make your plum-bob measurement after the springs and shocks have been installed and height has settled. My ARB bushings were tapered on...

I bought the GX460 brand new in February 2024 and replaced the entire suspension system for Eibachs at 500 miles on the odometer. I replaced them with the Truck pro stage 2 kit. I have all of the stock suspension parts and bolts inside of boxes that the Eibach kit came in. The work was done at...

Newbie to ih8mud here. I just swapped out my upper and lower control arms and did a complete brake service on my '04 LX470, and thinking about doing the front and rear drive shafts. 325k miles on my cruiser, and am trying to understand the level of difficulty on the drive shaft swaps...

I’m wanting to put about a 2 inch lift on my GX. All of the different options and opinions are overwhelming. I know that some comfort is sacrificed for performance, but what’s a good complete setup for mainly daily driving and a little off road use? And I know I can off road with stock ride...

Hi everyone, I recently picked up anotherLC with 310,000 miles on it, and I’m planning to give it a suspension refresh. If anyone in the DFW area has any LC suspension take-offs they'd be willing to part with, please send me a PM. Thanks you RB

Hi All, I am selly my Radflo shocks for 100 Series LC and LX470 vehicles. These include remote reservoirs with adjusters. I am selling because I switched to shocks that don't require remote reservoirs to take up space in the wheel well. These shocks felt great when I removed them, and I don't...

Hey guys, broke a leaf and now replacing with OME on my 1987 HJ61. After removing the old spring, I'm a little confused as to what to reuse or replace from the old spring brackets and rubber cushions. In the photos below you can see the bottom of the axle bracket with what looks like part of a...

Hey all, Looking for some insight. My 2000 LX470 is dropping the front end evenly and slowly after shutting the engine off. It takes about 30 to 45 minutes for the front to fully settle, slow enough that I can't actually see it moving. The rear stays steady the entire time. As the front...

I purchased a beautiful 96 LX450 and have been enjoying every minute of it! It came with a 4" lift and 37s KM3s. While it looks cool, it's not practical for our use (98% on road). I'm looking at lowering it to 2-3" lift and 35s on OEM wheels. However, I would consider other options as well. I...

Hello! My name is Bodhi and I am currently a college student at University of Montana in Missoula. I have a 2002 100 series that my dad bought in 2008 with 25k miles on it (a little over 180k now). I took it over in 2019 and have done pretty much all of the repairs myself since then, including...

Good morning all, I have a '91 HZJ73 and recently one of the rear (original?) leaf springs broke. Regardless of how or why, I'm not exploring my options and am looking for some guidance/opinions for replacing some/all of the suspension. Being a 73, it has leaf springs all around. Please let...

Looking for 100 series Land Cruiser OEM torsion bars (non-AHC). I am located in Cleveland, Ohio but am willing to pay shipping based on the price. I also frequently wheel in KY and TN and could pick up around there. Let me know what you have - Thanks!

Wheels: Nomad +35 Offset Tires: BFG KO3 285/70 R17 Suspension: Wescott Designs PreLoad Collar Kit It's time to take some small steps with my LC 200. The goal is to make it a bit more capable off-road by adding some clearance, without sacrificing much when it comes to driving comfort and...

Hello, I have attached everything I am buying for suspension plus wheel bearings. Please let me know if I’m missing anything I’ve tried to get everything I could think of (except for springs). I did my best to add everything I could but another pair of eyes always helps. Thank you.

Selling 60 series spring plate set. $60 shipped US.

Hello, I need to replace the suspension in my LC. I’m planning on getting an ARB rear bumper because mine is falling off. I don’t want any sag on the rear end but want suspension that is comfortable. I’m already looking at new bump stops for my LC. I was planning on getting OEM suspension and...

New to the forum and wanted to throw my ideas to the crowd and get some feedback. I've had my 2020 GX460 Premium since Dec 2023 and am looking at making some upgrades. I plan to install a Victory 4x4 Blitz front bumper with winch and their rear Strike bumper and move spare tire onto the...

I have the following NEW (in box) Dobinsons suspension parts for 40/45 series up to 1979 1 UB59-450K U-Bolt set (pair) 3 UB59-453-3 U-Bolt set (pair) 2 SP59-006 Greasable Pin Kit (pair) 2 SK59-002 Greasable Shackle Kit (pair) 2 PB59-1013K Polyurethane Leaf Spring Bushing Kit 25mm eye $450 shipped

Set of 4 AHC globes/accumulators for a 100 Series Toyota Land Cruiser or Lexus LX470. Never even opened. If buying them in person, I can also sell them with a couple of cans of AHC fluid that I picked up from the dealership. $550 firm.