sensor

hi guys, I took off the front badge to get a new one, was driving fine for weeks, then starting giving me error lights and couldn't do cruise control. wondering if anyone knows how to reset or this happen to you. I cleaned the front sensor box with a rag, Ive tried unplugging unit and battery...

Can someone help me and explain what is its purpose? It is an adapter threaded onto Speed cable (I think) to the transfer case . Engine and transmission has been swapped, not sure if this is needed? Yo be connected? L.C now has a 5.3 with the 4l60e transmission

Did an engine swap in my 80 series so I don't have a need for a lot of left over OEM parts Mass Air Flow for sale, no issues when I pulled the engine. Full disclosure, cracked the air side of the plastic part lip abount 1 mm) awhile ago. Put some super glue on it and it worked fine. Doesn't...

Gentlemen, I just picked up a 2011 LX570 that has a couple of problems: C1715 Front Acceleration Sensor Right Malfunction P0552 Power Steering Pressure Sensor I have no experience with either of these parts but apparently they both need replaced. I have ordered the parts, now to work out how...

Just mulling it over, over morning coffee, if my O2 sensors need to be swapped out after 298,000 miles? I don’t have codes telling me that they are bad? But do they become inefficient after so much time and mileage? Should they be changed out just for the heck of it? It came up because I did a...

Well rodents got it again, for the 5th time in 3 years and the 2nd time in 6 weeks. Good news is I've gotten really good at replacing it, Now HTF do I keep them from coming back? I've tried the sprays, the oils, the lights, turning the car on multiple times a day, wrapping the new harnesses in...

Has anyone had any luck permanently disabling the evap canister sensor on their 200? I am in the process of fixing all the issues with my truck before selling it, and this is the last thing I am down to. Trying to determine if there is an easy way to fix engine code it throws (which prevents...

A while back I read a post where someone had a carb fan fix using off the shelf parts to replace the carb fan sensor and thermostat. I purchased the parts and stowed them in a box for "later". Now that I want to install them I can't find the post. Tried searching any carb fan posts I could find...

Title sums it up in the best way possible, but I am working on an 89 4runner 3.0 automatic. Among the other neglect related Toyota issues, my main problem now is that I am having spark cut off once the engine reaches operating temperatures (Im assuming). This issue came on maybe a month or two...

I'm going right through my 400,000km 99 LX470 with 2uz and I'm wondering if the MAF sensor should just be replaced? The vehicle sticks of fuel at idle, like an old carby vehicle with the choke on. A quick good says that cleaning them doesn't quite get them to where they should be. Don't...

About 2 years ago I got a P0120 code (interestingly this was when I was playing with the transmission kickdown cable) right before a trip and decided to just buy a new TPS and be done with it, and that seemed to have worked, until the last few months. Now I am getting a P0120 code...

Have an '04 LC getting code p0330, knock sensor 2 bank 2. Where is this located? Thanks.

Hi all - first time posting, hope it can be of some help (searching for this issue turned up nothing). Front end collapsed on my 00 LX this week: no lights, error codes, just suddenly felt like every Land Rover / Navigator on air springs, riding on the bump stops (spine shatteringly poor ride...

I recently removed my intake manifold to replace the manifold gaskets. Anyhow I put it back together and now the oil pressure gauge isn't working right. I can't remember how I took it apart as the project spanned many weeks. I have these two plugs left over. One is 24v the other might be...

Any thoughts on whether or not this would work for a 2lt pump? Apparently my pump doesn't have the hole tapped from the factory. None of the 2lt engines in the US came with a tach so I guess that's why there's not a hole pre tapped, but I know basically every other country had the NA 2ls with...

I have a recently damaged water temp sensor on my 1990 24 volt 1pz. Confirmed today that this is the two wire unit running to connections 7 and 10 of the glow timer module as per the workshop manual. As soon as the wire severed I have no water temp reading on the dash cluster, just a constant...

Hello all. As a long time fellow 3FE owner, I have spent a TON of time going over this engine to make it run its best. There are not many sensors to make it happy, but refreshing the system still takes a while, especially when you have to hunt down not only the sensors, but also the connectors...

Hi all, I have a ‘96 LC and was getting the “O/D OFF” flashing light. Had my mechanic put the code reader on and it showed PO710 error code, which means: Transmission Fluid Temperature Sensor Malfunction. Trouble Areas: open or short in ATF temperature sensor circuit; ATF temperature sensor...

2006 LX470 Stock equipment: torsion bars (2), $100 rear coil springs (2), $50 upper control arms (2), $50 - SOLD differential bracket (1), $50 accumulators $ (make offer), ride height switch $ (make offer), pump $ (make offer), reservoir $ (make offer) AHC sensors & linkage components (SOLD)...

I was having an issue with my thermostat reading temps of 140F to 160F, never reaching the operating water temp of 180F. A cool engine sounds cool but its really not, Oil only cleans when its at operating temp and the engine is optimized to run at 180F. I already had drained some coolant when I...