rear

I'm looking at refurbishing the rear suspension on my LX. I would like to go oem if possible. I've found d everything on my list LC shocks (the AHC is long gone and has been replaced with the Strutmasters kit), sway bar links and bushings, and control arm bolts are in my Camelback Toyota...

Has anyone looked into putting a strut/shock on the rear lower hatch? A buddy of mine did this on his truck. Definitely a great upgrade if it can be done.

So I'm upgrading to RCV's up front, what are the best options for the rear axle? I primarily wheel in the snow where weight does matter a little, but it would also be a really bad place to get stuck if an axle fails. I'm definitely on a budget due to having too many projects, but I know that a...

Since the rear hatch washer nozzle is NLA, I found this part that is a true plug and play no hassle intsall. Half a bananna and 20 minutes you have a functional nozzle for under $20. Part is from a 2007-11 Honda CRV, this is listed as an upgrade part and includes the adjustable spray head, a...

Hello NC family - nice to 'meet' you. I'm sure I've gotten a few suggestions from some of you over the last year or so as I've been working on my 1985 FJ60. Looking forward to really meeting some of you at an event in the future. I'm up in Asheville. Sadly, my truck was hit about a month ago...

I have a pair of stock rear springs for free. Truck had 200k when I removed the springs. I will not ship but could meet up with someone in the general area.

Rear heater mounts under console. Good condition. SOLD plus shipping. Was from an 1989 FJ 62.

Complete rear axle from 1989 FJ 62. Disassembled to start spring over and sold project. Factory 4.11s backing plates are pretty well shot. Will sell components if wanted. $200 complete will ship on your dime. Located in Granger Indiana

My '66 FJ 60 has always had really beat up rear corners that I tried hard just to ignore. They are beat at the bottom and all the up to lip where the top attaches like it was rolled with no top on a few times. There's a long range tank in the back, which is great, but the fill was put in way to...

This winter I am going to build my drawer system in the back of my runner and I remember back before it snowed seeing one with a plastic on the bottom used as the slider and wondering what plastic that is and where to get some. Also if you are at the next meeting I'll probably be there as well...

Hi all, We bought a man-a-fre shackle reversal kit. In the instructions it says the holes center to center should be 42 1/8" unless you want to move it closer for a softer ride. My dad and I are new to working with leaf springs so don't know much about how to adjust ride quality and shackle...

I just bought my first Land Cruiser and I am super stoked about it! Anyway, it is in good shape overall, and it seems to run quite well and the factory lockers function well. I do have the following issue: The rear hatch So the right side doesn't close all the way. Tail gate abnormal side by...

Anyone have the correct part # for the rear diff motor housing? Mine is rusted and torn apart. Who else has had to replace this? Thx

It's impossible to remove it isn't it? I tried pulling that sucker out for half an hour last night. I don't see any retaining clips or screws for it - is it part of the dash?

Hey guys - I'm tackling running air lines for my front and rear lockers today to save me some dough when the shop installs the lockers tomorrow. I have the air compressor installed in Slees dual battery tray which is on the passenger side of engine bay. Where should I route the lines and what...

Could someone tell me what model years the nylon gear (72751-39020) in the tailgate regulator works in? I have an FJ55 manufactured November 1975. It has front disc brakes so I believe it is considered a '76. Anyway, I have the gear and want to know if it will work in my year.

I have been tried to look for a post on this behalf, but not success yet on my especific questions. Can I fit an elocker axle from 98-99 100 to a 06-07 100 with little or easy work? Or it'll be a PITA. It will be worthier to fix another lockers instead? I just put 285/75R18 and if I got the...

I've searched, but can't find a clue as to what the long cubby in the rear passenger side was intended for. It has some stretched out elastic straps in it, so I'm assuming it got some use...

I got the bumper about a year ago and never put it together and put it on my 80. Well, I sold my 80 a couple of months ago and the buyer wasn't interested in it. It is a dual swing out, tire carrier and 3 jerry can basket. Everything is still in their shipping boxes. I'm looking to get a $1200...

Hi guys, I just noticed a few spots of grease splatter on my rear left rim. This wheel also had two hub nuts replaced about 3 months ago. Should I be concerned or is this normal, haven't seen this on any of the other wheels. Check out the attached pictures.