rear

Everything SOLD. Nearly new Old Man Emu (OME) rear springs for 100/80 series 866 rear springs. Zero miles. Only test fitted and removed. Fits 80 or 100 series. Typical application: 100 series, Heavy Load, 1.5" lift. Shipping weight 39 lbs. 865 rear springs. 200 miles. Test fitted and...

Hi all, I am going to replace the seal in the extension housing of my transfer case. I am led to believe that it is just a case of removing tail shaft, flange and unstake the nut to access the seal. Is this correct? ive had conflicting advice, some say you must split the case in order to reach...

does anyone know if there are other options for 3 point seatbelts for 60s? what I mean by options are... is there some Honda out there that has the right length and a belt rewind that isn't massive? I have never seen a 60/62 in a junkyard but see Hondas for miles, just wondering if anyone has...

Selling my '94 rear non locked complete axle. Unknown miles on it. Picked it up for my '91, but sold it before I had the chance to install it. Located in Colorado Springs, willing to meet anywhere in Colorado for a small delivery. Will work out price depending on distance. Looking for $400 obo.

Sooooo, I took my truck to lexus a couple of months ago and they diagnosed my truck needing a new rear AC condenser. $1k from them to replace. talked to my local mechanic, and he quoted me the same price. couple of questions... 1- how rare is this failure? 2- do I really need rear AC...

Anyone have some they have removed after installing new springs? Thanks

On my way to work this morning, sitting at a red light and all of a sudden I'm jolted forward 10 feet by someone not paying attention. I'm ok, neck hurts a little...but I can't open the swing out, pin seems to be jammed in there. Gotta take it to a body shop to asses the damage. Anyone have...

no longer available nos oem outer door handles, 63 to 74. ( 6 available) $75 each shipped. 2 late model 75 to 84 outer handles, $75 each shipped, 2 rear hatch outer handles., 65 to 73 $85 each shipped, mint oem chrome!

97' LC With the ignition in accessory mode: 1. Lock the CDL. GOOD! 2. Rotate dash button to lock the RR. I hear a click in the passenger dashboard but nothing at the rear actuator 3. Rotate dash button to lock FR. I hear a click in the passenger dash and then hear the locker actuator move...

Hey guys I thought I would post this, my rear seat pull cable wad broken, so I found a pull cable on ebay that works much better than the factory piece and I think it looks much better. Here's the part number if interested.

I need a rear FJ40 heater. I am also willing to consider an FJ55 rear heater. Thanks!

Can anyone tell me the difference between a rear heater from an FJ40 and FJ55. Think similar year of each compared to each other. Is there any reason I couldn't put an FJ55 rear heater in an FJ40?

Hello, I am looking for a rear passenger side shock 99 lx470 with ahc. Thank you, Andy

x

Up for sale FREE is a hitch that was pulled off the truck It's solid, but has got some rust bubbles. It likely needs a blasting and a fresh coat of paint. FREE plus shipping CONUS

I have a complete set of wheel cylinders from CCOT. They inadvertently sent me two rear sets and I unknowingly put a set of rears on the front. I ran them for about 200 miles and thought it took a bit too much time to stop. It was then I realized that the cylinders meant for the front axles...

Anyone upgrade the rear springs to some "better" but keep the OE height? I'm not really interested in lifting the rear, but would like better load handling/droop performance.

Looking for a complete wiring harness. Painless, Kwik, or Coolerman (front, rear, or both) for a 74 FJ40 with a 1.5F

This is trivial, but for some reason annoying me when I'm driving around and the rear jump seat is flopping / banging around back there when I have it in the up position. The velcro came off one of the straps. I put a new sticky piece on there and it seems to be holding up good, but for some...

Anyone who has the 4x4 Labs rear bumper on their 80 willing to send me a few measurments? I need to know where the spindles go. Exactly how far from the corner of the outside of the bumper. Mine didn't come with pre-drilled holes. If I am off a little on the width, I can fix that when I build...