rear

Looking for a pair of rear leaf springs from an FJ60 or 62. Would prefer stock but will entertain lifted as well. Contemplating running these in the front of my SOA FJ40 so lifted isn't really ideal. I know it's a long shot and I might as well get some new ones but thought I'd ask. Thanks y'all.

Can the rear seats be removed for extra storage like the 100 series?

Brand new. Complete rear wheel bearings. $400 shipped.

Some fresh items from Japan have arrived. PayPal or Venmo available. 1. New in plastic wrap 80 series rear diffuser. What it looks like fitted is 2nd pic. $100 2. Aftermarket 80 Series Rear Spoiler. New in plastic. $200 3. Dakar mini poster 8.5x11 $20 accidently crushed it :skull: 4...

'19 TRD Sport Sequoia I will be installing a Bilstein 5100 adjustable shocks set at 2.5 inches of lift. Rear 5100 shocks also will be installed and 2 inch polyurethane spring spacers. Has anyone had any problems with 2 inch rear polyurethane spring spacers?

I need a lower right rear spring plate, the part that goes under the spring with the lower shock mount. From a 1990 or newer 70 series. This has the shock mount on the back side of the spring plate, not the front side of the spring plate. I am installing a rear sway bar and the forward...

Hi everyone. Continuing to rise from the dead of my 05 Sequoia. I have a question about the rear climate control, it wasn't working from the start (no backlight or numbers on the screen). I took out the control panel and found out that it was unplugged. Nevertheless, after I plugged the wires...

Bought these but they don't work with my rock sliders. Fits 4th gen 4runner/ GX460/ FJ cruiser $100 plus shipping

I'm trying to find a replacement rear wheel hub. I've sheered my drive flange studs and shear pins several times on my unit and I need to either take mine off and machine it back to working condition or find a replacement. In Colorado, willing to pick up in person or pay shipping if we can...

So, I know this should be well known, and I thought I knew for certain that a 2003-2009 4Runner complete axle assembly will fit a 2006 GX, but when I search on ebay, it does not include the GX in the compatibility list, so it made me doubt eveything I thought I knew about this world. Can anoyone...

Looking to remove the factory rear screens in my '18. I found a product on Victory 4x4 that covers the holes. Is there another product anyone recommends or any info from anyone who has used these? VLCMD.html Does anything with entertainment system need to be done besides unhooking them and...

needed, msg me. thanks..or if you have 2 from the Toyota, those will work too

Greetings, My rear wiper won't stay flush with the glass (only closest to the pivot- anyone else seen this issue? IS it the spring in the wiper arm? IF so is that available and what is the part #? THANKS, Harry

Hello, The trim piece towards the front of my rear window is cracked in two places. It's cracked in the same places on both sides of the vehicle. Are those replaceable? If so , does anyone know what they are called and maybe the part number? Thanks

I've been looking off and on for two days but can't seem to find anything specific. I finally installed my Restless Offroad half length tire swing out so the next step is to relocate my camera and reverse lights (still not sure which route to go for the lights). The problem is I don't know the...

Pair of new-ish rear OME Nitro shocks for +74 FJ40. Just rears. Installed but not driven on. $200 shipped

Hello. Does anyone identify these Heystee parabolic rear springs? They have been in BJ42. How much they are supposed to lift?

Hello, pulled out my rear axles as they were leaking oil a bit. Both axles are having groove in them, the longer axle is very noticable, the short axle is little bit better. One of the spindles got few scratches, not sure if these can cause leaks too. So, the axles can be easily replaced, but...

Hey all I’m just wonder what this hose that looks like a breather is for on my 1979 fj45 troop carrier with drum brakes all round I am getting no movement in the back wheel cylinders, they look fine adjust fine and I have bled them and there’s no trouble getting fluid through.

I've got some mild vibration at 45 to 52mph from the rear of the truck. I pulled the rear driveshaft to verify and I've got a DC front driveshaft. To correct pinion angle, it appears I have several options: Install adjustable upper control arms. Rotate the top of the axle forward for proper...