ome

My kid drives the 62 now so I'm not as aware of its daily creaks and groans, until I moved it out of the driveway a few days ago. Horrendous clunking/rattling with every move of the wheel. Long story short, several of the front OME Spring bushings were shot...one set completely GONE! The...

$360 shipped to a commercial/business addy, no residence. Old Man Emu springs for the 80 series. Still have tags on them, these were used for less than 100 miles

Moved to a bigger spring. Selling these. Shipping is not very economical so would prefer local pickup. Old Man Emu OME lift springs land cruiser

I'm in CO, so local would be awesome, but also could pay for shipping. Shoot me a DM if available, thanks!

DELETED FOR CORRECT THREAD

I purchased a 03 LX 470 a couple months back to be my DD. One of the items pointed out when I had my mechanic take a look at it was the leaking shocks and likely issues with the AHC system, so I went into knowing I would need to do something about the suspension/shocks/tires. In light of...

Hi Guys, I have decided to install an OME nitro-charger option on my truck. I'm thinking Slee stock kit, with 2702 front and 2722 rear. This is a 2" increase in the front and .75" in the rear. I have three questions: First - With this set-up, can I still install the Toyota front struts spacer...

I just installed 2.5" lift. Looking into ordering sway bar disconnects from LCP. Will I need sway bar spacer/longer brackets? I read through his thread and it says to cycle suspension to check clearances. Just not sure if I should order the blocks/brackets as well with just a 2.5" lift.

just pulley these to install a J lift. Springs are dirty but still in good usable shape. Shocks are old and should be replaced. They still rebound and are free if you want them. These are the heavy 2.5 inch lift springs. Front pair are the 850, rear pair is the 863. Would prefer not to ship but...

I'm swapping out my OME 2722 Springs for 2724 pretty soon. Anyone want the 2722s for $100? The 2722s were installed on my 200 Series one year ago.

I'm planning on putting some of these springs on my 97 LX450, which will eventually have a bullbar, winch etc and I was told the springs to get to get a 4"(unladen) lift would be the OME 2850 and 2863. Trouble is, I gave the sales person and old OME part numbers (850J and 863J)and he said that...

hello mudders, I'm interested in picking up a set of lightly used ome coil springs to remedy the 20+ years of coil sag in my stock fzj80. Does anyone have a set of 2861 front and 2862 rear coil springs for sale? Thanks for you help. Jon

hello mudders, I'm interested in picking up a set of lightly used ome coil springs to remedy the 20+ years of coil sag in my stock fzj80. Does anyone have a set of 2861 front and 2862 rear coil springs for sale? Thanks for you help. Jon

Anyone running this lift? Is it level, do I need spacers for the front and are there any driveline issues? Thanks

I want to trade a set of OME LC 200 18"rims (very good condition) and tires for a set of LC 200 17" rims (steel or aluminium ok). Willing to travel for a meet around VA. If interested PM me or call me at 703-674-9971. Also available for sale. Regards, Mitch

Has anyone had a problem with a vibrating humming noise coming from the front. I can actually feel it through the gas pedal. Thanks

I noticed a my passenger side front leaf spring stack has shifted - springs have moved so a couple of longer leafs are net stacked straight. I get an occasional clunk from the front leafs when cornering, and that got me looking at the springs. I have tapped them into alignment, but they will...

1997 Land Cruiser I just installed the 3-inch HD OME lift. Looks great and feels smooth but I have a grinding sound/vibration at high speeds (65mph+) and especially audible when I release the gas from high speeds. I initially thought driveline angle issue after lifting it but would a 3-inch...

Ok im thinking my spring bushings are worn out and im looking to replace them with same OME as they came with. My 2.5" kit is at least 10 years old. I have no idea of the model number of it so i have no idea what bushings to buy or are they pretty much standard from the different levels of OME kits?

Hey guys - Just listing my cruiser for sale as i am going to need the space for summer. It's originally from Texas, lived in PA then came to New York and has only been here from what i can tell a couple of years. i bought the truck because it is rust free. body / frame / tailgate / door sills...