I purchased a 03 LX 470 a couple months back to be my DD. One of the items pointed out when I had my mechanic take a look at it was the leaking shocks and likely issues with the AHC system, so I went into knowing I would need to do something about the suspension/shocks/tires.
In light of...
Hi Guys,
I have decided to install an OME nitro-charger option on my truck. I'm thinking Slee stock kit, with 2702 front and 2722 rear. This is a 2" increase in the front and .75" in the rear. I have three questions:
First - With this set-up, can I still install the Toyota front struts spacer...
I just installed 2.5" lift. Looking into ordering sway bar disconnects from LCP. Will I need sway bar spacer/longer brackets? I read through his thread and it says to cycle suspension to check clearances. Just not sure if I should order the blocks/brackets as well with just a 2.5" lift.
just pulley these to install a J lift. Springs are dirty but still in good usable shape. Shocks are old and should be replaced. They still rebound and are free if you want them. These are the heavy 2.5 inch lift springs. Front pair are the 850, rear pair is the 863. Would prefer not to ship but...
I'm planning on putting some of these springs on my 97 LX450, which will eventually have a bullbar, winch etc and I was told the springs to get to get a 4"(unladen) lift would be the OME 2850 and 2863.
Trouble is, I gave the sales person and old OME part numbers (850J and 863J)and he said that...
hello mudders,
I'm interested in picking up a set of lightly used ome coil springs to remedy the 20+ years of coil sag in my stock fzj80.
Does anyone have a set of 2861 front and 2862 rear coil springs for sale?
Thanks for you help.
Jon
hello mudders,
I'm interested in picking up a set of lightly used ome coil springs to remedy the 20+ years of coil sag in my stock fzj80.
Does anyone have a set of 2861 front and 2862 rear coil springs for sale?
Thanks for you help.
Jon
I want to trade a set of OME LC 200 18"rims (very good condition) and tires for a set of LC 200 17" rims (steel or aluminium ok). Willing to travel for a meet around VA.
If interested PM me or call me at 703-674-9971. Also available for sale.
Regards,
Mitch
I noticed a my passenger side front leaf spring stack has shifted - springs have moved so a couple of longer leafs are net stacked straight. I get an occasional clunk from the front leafs when cornering, and that got me looking at the springs. I have tapped them into alignment, but they will...
1997 Land Cruiser
I just installed the 3-inch HD OME lift. Looks great and feels smooth but I have a grinding sound/vibration at high speeds (65mph+) and especially audible when I release the gas from high speeds. I initially thought driveline angle issue after lifting it but would a 3-inch...
Ok im thinking my spring bushings are worn out and im looking to replace them with same OME as they came with. My 2.5" kit is at least 10 years old. I have no idea of the model number of it so i have no idea what bushings to buy or are they pretty much standard from the different levels of OME kits?
Hey guys - Just listing my cruiser for sale as i am going to need the space for summer. It's originally from Texas, lived in PA then came to New York and has only been here from what i can tell a couple of years. i bought the truck because it is rust free. body / frame / tailgate / door sills...
Started working on a nice 100 series yesterday. It's getting OME springs, TJM air lockers, Nitro gears, a Slee diff drop, and OTRAMM sway bar bracket repair kit.
Hello all,
I have been reading threads and researching lifts and am leaning strongly towards the ARB Dakar lift. I really like the 2.5" vs the 4" for my needs. My question is to whether I should do the light kit or the heavy kit? My use will be local cruising about with occasional trips to...
SOLD @LorainetheFJ62
Hey everyone,
I have a set of 4 old man emu (OME) medium lift greasable shackles and 4 shackle pins from my FJ62. They were installed on the truck about a year ago, the only reason I replace them was because they lost some of their yellow zinc finish. The measure 3.5"...
Went to pick it up and the new OME 2.5 lift and its leaning toward the driver side. Its too much to ignore. He said the A and B springs are fitted correctly. Any things you guys have done to straighten it up?