gauge

I have a recently damaged water temp sensor on my 1990 24 volt 1pz. Confirmed today that this is the two wire unit running to connections 7 and 10 of the glow timer module as per the workshop manual. As soon as the wire severed I have no water temp reading on the dash cluster, just a constant...

Evening, What do people here generally see on their OEM oil pressure gauge w/ factory 2F motor!? I’m sure these aren’t incredibly accurate gauges, but, just curious what’s “normal” out there. This seems a little high (attached photo). Thanks!! 1978 FJ40

I'm aware that this is a common issue but even with all the forums on the 120 series I can't find anyone who actually have specs on what smd led will solder in to my burnt out gauge cluster behind the 0 - 20 mph area.. Help!!! I know I'm only one among many who need to fix their burned out gauge...

Hey there, I recently got an Issopro EV2 EGT gauge for Christmas and was wondering where the best place to put it would be for accuracy and response time? The 2 places I'm deciding against I have marked in red and orange as you can see. So which would be better, or is there another better place...

Hi, Everyone. I recently acquired a best of 80 series, HDJ80. Since it's turbo'ed, I want to have 4 different readings as I drive down the road: 1. EGT 2. Oil Temp 3. Boost 4. Coolant Temp I know it would be a cakewalk to add gauges that reads from the OBD2 port (such as Scan gauge) ONLY if...

Unknown condition on the gauges. Odometer works, however, speedo needle is broken. Gauge is in KM/H. $100 plus shipping. 214-676-3084

I noticed that all my gauges were dead after pulling another car out of the sand in low range. (Part-time 4WD model) After checking the interior fuse box I found that the gauge fuse was blown, Replacing the fuse fixed the gauges but Engaging L4 will cause it to blow again. I don't know where to...

I have a 92' 3FE LC. Recently I replaced my fuel sender with another used unit that was known to be in good working order because my gauge needle was jumping/dancing and not marking correctly. The needle shows a fairly accurate depiction when I accelerate and then I let go of gas pedal, the...

my 1974 spins the tenths digit, but no more. Anyone have parts to rebuild/replace the unit that I could take off their hands? Cheers and thanks!

Fuel gauge updates on ignition to read correctly but does not go down with gas use and sticks after the truck is turned off (until fired up again -- can't remember if that is normal). Since it reads correctly on igntion I am guessing it is not the sender .. probably electric then? or am I way...

Well, like many on here, I’ve experienced the dead oil pressure gauge in the dash of my 80. While most would probably say, “replace the gauge and move on”, I am really cheap, and felt like taking the dash apart… Cliff notes: I ended up bending the gauge internals to get it to read again...

I just updated from my 2000 LC to a 2004 LC and went on my first longer highway drive this weekend (3.5 hours each way to Steamboat Springs and back). I had just replaced the battery and hadn't noticed before on shorter drives, but after about 1.5 hours the speedo and tach started reading really...

Hello, I have a 1973 FJ40 and I have been struggling to remove my dashboard gauge cluster. If anybody has tried this, you will know what I mean. How do I get it out? No matter which way I pull it, it feels like there are metal tabs in the dashboard holding the cluster in place. Any tips/helpful...

Hi its been getting pretty out here in California recently and one thing I noticed is that all my gauges except for the Speedometer stops working and drops to zero once it gets above 100F. Has this happened to people? What do you guys recommend? Gauge by ghong14 posted Sep 8, 2017 at 12:42 AM

I've recently (well about eight months ago) purchased a 1998 LX470. I've been lurking around this forum and found several very useful threads, Thanks for all the help! I now have an issue that I haven't been able to find any information pertaining to my exact problem. I have an issue with my...

Front seats with headrests, seat frames and center console. $300 Radiator mount / support $70 Metal fuel tank with new sending unit $150 Metal fuel tank shroud / cover $150 Original gauge cluster $200 New poly fuel tank in box $150 If these prices are way off please let me know. I don't...

I noticed the low fuel warning light started to light up a lot earlier than usual, has anyone experienced this before? See attached photo.

I know this has been beaten down but I need a little quick help. I looked at some threads on this but wanted to ask about mine specifically. When I turn my key on my oil pressure gauge needle goes to the middle reading. When I turn my FJ62 on the needle drops to 1/4 and when I get on the highway...

My speedo quit working. I know why, but it's not fixable. So I either need a complete gauge cluster or just a working speedo from said cluster. It's needed for a 95-97.

New price: $250.00 OBO plus shipping. All gauges, direction signal indicators (red), blue high beam indicator and integral lighting of individual gauges all work. Removed from my '78 40 after 2FE conversion was completed as I went back to stock . Included are the water line complete with sensor...