frame

Looking for a frame for a 1978 fj40. I would prefer somewhere around a 10 hr drive or less from MN.

Hi, Who’s still making fj40 late frame replacement parts? Thanks, Mike

NOTE: If one does not want to deal with removing the gussets they could just torch these sections of frame rails and I will disassemble.WTB inner frame gussetts for 64 FJ45. These are riveted into the inside of the frame rails. Need area from steering box to rear of pick up cab. Both sides...

These are riveted into the frame rails. Looking for piece from steering box back to rear of cab on pick up. Both sides. These plates are on-INSIDE of frame and have a series of 2-3 inch holes along the length. Thank you in advance.

Looking for the inner frame gussets for both sides from steering box back to rear of cab on the INSIDE of the frame rails. These are riveted into frame and have a series of 2-3 inch hole spaced out. Good solid condition. Thank you.

Clean and titled 1978 roller frame for a FJ40, changed mind in project after collecting the parts for it over the last few years. Looking to get $3000 or best offer. 5.13 gears front and back still has drum brakes. This is as original as it can come. Thanks for looking.

Looking for a decent Fj60 frame or roller. Located in northern Florida but willing to travel or ship over , TiA

Just picked up a plasma cutter for a current build and will be taking all the stock frame suspension components/mounts off a fzj80 frame to put under my 62. Frame will be scrapped after so if anyone needs any components off of it for relatively cheap feel free to message me. Body mounts or cross...

I would like to fabricate and replace the rear crossmember on this FJ45. It is a little beat up but not corroded. Not full understanding how the frame rivets work and if I were to grind them off…what would be the process in riveting the new crossmember back on? Can it be bolted or is riveting...

Hey all, This may be a dumb question, so openly mock me if appropriate. I'm looking at a 2014 LX570 and got pictures of the undercarriage to check for frame rust. It looks clean, but I noticed a long weld seam on the frame and that feels... odd? Would love someone smarter than me to take a...

Front left. Right in front of the engine mount. The black plastic box is the front diff vent, the one I'm wondering about is the vertical nipple/ barb. What hooks there? I don't remember. This is on a 96 Lexus. My 94 FJ didn't have it, or the plastic box either. I'm planning on remote...

Hey all. I'm in need of a set of FJ40/45 engine frame mount brackets. See the picture below. If you can help please shoot me a PM Thanks! JP

Not positive of the origin fj40/45. They look identical to the seats in my 1978 fj40 but without the metal backs. Reupholstered two years ago, but slightly sun faded. $700 or trade/partial trade for parts for my 1969 fj40 (front brake disk conversion, DUI distributor, fuel injection, body sheet...

Hi all, I spoke to a gentlemen about my specific problem and he referred me to this forum. I hope someone on here can help. I have a 1997 FJ80 40th year Anniversary and my frame is rusted out. I would like to keep the truck. What, if anything can be done?

Want to replace my 2004 lx470 frame crossmember #4. I am in NY, let me know if you have one. TIA. BTW, picture is not mine.

What is the exact dimension from inside-face-of-frame-rail to inside-face-of-frame-rail on the front of an FZJ80? TIA!

Thought y'all would enjoy seeing some expert frame welding. Question, what actually was welded here? I belong to a female toyota FB group and a woman posted this truck and that her and her husband were flying to FL to take a look but they don't know much about them. I suggested she post here and...

I already posted on dealing with rust on frame but the leaf springs on the OME are rusty and ugly…I’d like to restore to something that resembles nice without removing. Any advice is appreciated!

I removed my hitch receiver and one of the six captive nuts is broken inside of the rear frame. Unfortunately, it's the nut that is by itself and farthest from the bumper. They are not evenly spaced out so it wouldn't be my first choice to do without that fastener. My aftermarket bumper will...

Hi all, Currently stripping my HJ47 Ute back to it's frame and am checking it over for squareness. Pretty new to this and unfortunately the second frame I had which I was hoping to use has far too much internal rust to consider it so I'm trying to seek some advice on how bad the frame I have is...