coil

Rebuilt the front axle last weekend and installed a set of 50mm Slinky's while I was in there. Looking at the FSM (after the fact, oops) it appears that one of the PO's had installed a spacer. Which has a large split in it. Two questions, 1) is this in fact a spacer and 2) how much of a split...

I figured I will start recording my thoughts here in case anyone else is interested or I need to review later on. This is going to be a straight up comparison, apples to apples of the OME J lift and the Dobinsons lift. Before: Old Man Emu 850J front / 863 rears OME sway bar drops Fox 2.0 shocks...

I'm planning on putting some of these springs on my 97 LX450, which will eventually have a bullbar, winch etc and I was told the springs to get to get a 4"(unladen) lift would be the OME 2850 and 2863. Trouble is, I gave the sales person and old OME part numbers (850J and 863J)and he said that...

hello mudders, I'm interested in picking up a set of lightly used ome coil springs to remedy the 20+ years of coil sag in my stock fzj80. Does anyone have a set of 2861 front and 2862 rear coil springs for sale? Thanks for you help. Jon

hello mudders, I'm interested in picking up a set of lightly used ome coil springs to remedy the 20+ years of coil sag in my stock fzj80. Does anyone have a set of 2861 front and 2862 rear coil springs for sale? Thanks for you help. Jon

Hey all. I'm new to the 4 link world. I would like your opinions on what direction I should go with my 1992 single cab. I tow a stramcleaner skid with a 200 gallon water tank with it. Currently IFS lift running 36" tsl swampers. 5.29 gears. I'm looking for the best riding, performing on and off...

1994 FZJ-80, used coil and will include a fuel pump resister I had both as spares. $50 shipped in conus.

I have a 4" lift kit from Dominion and when suspension fully extended especially rear, coil spring pops out. What should I used to solve this. Saw coming limiting straps from Trail Gear which looks like it would possibly work by limiting travel or droop. Has anyone had experience with this?

As title states... 1.5" front coil spacers made from billet aluminum from Slee.. These were used in their 5" first gen lift approx 10-15 yes ago... Bolts up to spring upper tower...100 bucks plus shipping

Pertronix flame thrower II coil. Model 45111. 45,000 volt 0.06 ohm I was planning to use this on my engine but decided to use a stock FJ60 coil and ignitor. Asking $50 shipped

Guys, I am wondering if there are advantages in switching to springs for suspension articulation on my 2004 gx470? I tow with my rig and also plan on getting into overlanding and fear that after loading up the truck with gear it will have some sag in the back that could be easily avoided by...

I need factory height rear coil springs. I don't care how used or old. I threw mine out when I installed my 864's. PM me if you have any. Thanks! Brock

The 34 dollar 1984 22r pickup coil (signal generator), works as well as the 100 dollar, 1984 2f signal generator. Same thing. Just an FYI.

My LC100 started running oddly. After taking it to a friend to have it looked at we arrived at the conclusion that one cylinder was not firing. I Took it to the dealer to have the conputer read, but there where no codes (In Iceland the older LC100 models have the ODBI not the ODBII) so I...

Anyone have or know of a FSM for the 98+ FZ with the coil packs and redesigned head?

We are having an issue getting spark on our 1972 FJ40. We have verified we are getting the correct voltage at the coil (between 7 and 8 volts) and more (around 12) when starting. However, nothing is coming out of the coil. We're replaced the coil, condenser, coil wire, wiring, and today...

Hello you guys,,,,,,,,I am sure many of you already know this but I could not find a posting on MUD so here is my information and research results in case you need it.////////////////// 12 VOLT / 1980 BJ40 REPLACEMENT GLOW PLUG CONTROLLER COIL = 1.68 mm steel wire / 3 loops @ 8 mm inner diameter...

I am coming up empty on solving a rough running issue on my 1999 Toyota Lancruiser. I'll start at the beginning and then ask my questions. My wife was driving the Cruiser while I was out of town and called to say that it was running horrible and the check engine light was flashing. I told her...

this looks like it would rock in a F2 EcoIgnition - Earth friendly performance Heard of anyone using these ? I would assume some racers would, but i would be interested to know if it would equal a V8 upgrade, along with better mileage....