brake

Looking at the SOR brake line kit and was wondering what people’s thoughts were. Will have to figure which one would work best for me as I have a 67 FJ40 that I converted to disc brakes. https://www.sor.com/cat/086#tab1 I have bent and flared lines in the past, so that’s also a consideration.

Seven years ago I installed reman calipers and new brake pads all around and discovered today I have a leak. Roughly 25k and haven't had to replace pads yet. Haven't had a chance to investigate but wondering if there is any quality difference between the major auto parts store reman quality?

Looking for some recommendations on what parts direction to go on two major projects on my 96 RHD FZJ80. The Two major projects are Brakes and the classic knuckle rebuild. For brakes, planning on rotors, pads, and one caliper. Any recommendations? While I can do the OEM from Cruiser Outfitters...

Looking for opinions on the Slee SS Brake Line kit. I have a 2005 and I’m planning on rebuilding by brake caliper pistons. Obviously some synergy there with just gutting the existing brake lines and resetting that clock for years to come. I’m considering upgrading to Slee’s kit. Who has put in...

Complete. $200 includes shipping to lower 48 states.

The parking brake / hand brake on my LJ78 has always been rubbish, it will work great for a short time, but will then stop working even after replacing all the shoes and disc/drum. So I have been looking at alternatives, and the two I can find are: 1. Fit a transmission brake - I don’t really...

The car is a RHD Auto HDJ 100 4.2 TD from 1998 which I have owned for many years. A few years ago I replaced the pump and accumulator and also did the piston servicing kit. The issue is that I sometime have a brake pedal that progressively goes to the floor. Note that on the floor the car stays...

Anyone have any experience with Specter's stainless brake hoses? Looking for stainless and a bit longer than stock.

Just curious if anyone knows if the pads are different? Image from a previous brake pad / rotor change.

Up for sale is a brand new MC and brake ECU attached to a used accumulator, used pump, and used reservoir. Had a customer attempt to install his own brake unit and strip out the front most brake line on the MC. Selling this for parts as it could be rebuilt or some of its components reused for...

Looking for source for front brake calipers for 79 40x mine are trashed and not rebuildable.

97 lx450 brake lights or staying on when turning everything off, what are common things to look for? Kyle

Installed 1 of these a couple of months ago. Brake Booster - Hydraulic | Marks 4WD - https://www.marks4wd.com/brakes/hydraulic-brake-booster?wpf_filter_vehicle=toyota-landcruiser-80-series&wpf_fbv=1 Probably the best Brake upgrade I've installed (there have been many). Pedal feel is instant...

I've looked all over but can't find the castle nut or washer for a 1969 FJ40 parking brake assembly. I've checked SOR, CCOT, and CruiserTeq. Any help would be appreciated.

Brake booster failed driving home yesterday. Has anyone had to replace theirs? A few brands offer an upgraded dual booster- any opinions on these? It's hard to tell if they mean it's an upgrade from the single or upgrade to the dual. 80 series, '94

Getting ready to install brake lines on my 79 fj40 rolling chassis. Have 3/16 cunifer line and looking for suggestions on brake line flare nuts. Upon disassembly appears that fittings require double flare and the nuts I took off are 10x1.0 inverted flare / double with non threaded end. Having...

Does anyone have a recommendation for a replacement brake booster? I need to replace mine and was looking for a quality aftermarket alternative.

Hey there everyone, I am just wondering how I determine which wheel cylinder adjusts which shoe Thanks

I have an emergency brake dash light that comes on when its really cold when I first crank it but goes off once the truck seems to get warmer. It usually stays on for a minute or two then goes off. It also may come on for 20 seconds or so once warm but always turns off. Any ideas?

Looks like my master cylinder is on its way out and needs to be replaced. Do I need a Techstream program to complete the bleeding process? TIA