2lte

I have a 2LT-E that I'm going to swap into my VZN-110 with a 3VZ-E. I've got the engine in the back of my other truck, an ECM and wiring harness on its way from N.Z., and I'm still looking for a Bell housing for my R150f transmission, and a relay setup. What other stuff should I be getting...

Daily Driver, Great shape. Synthetic Fluids. Building a house on land and i'll need a Tractor/Backhoe/FEL or BobCat more than I'll need this now. Or a heavy duty 4x4 Diesel Truck maybe with a Dump bed. Anyway, Replaced the Fan Clutch with brand new and upgraded to the 7 blade fan per one of the...

Fuel Cut Defencer | ELECTRONICS | PRODUCT | HKS This is a voltage clamp for a MAP sensor. You wire it into your map sensor, work out the voltage of the signal just before 14psi and the clamp will prevent the signal from increasing. Therefor you can run as much boost as you like without the...

Allright guys, Over this past year I have been reading up on this forum for different tips and tricks to gain extra power out of the 2LTE and thought i would share my experience, as I haven't seen it been done on any of these related forums. I obtained the truck in February, and in the saddest...

Been lurking for a while on the 2LTE issues, but finally have one of my own. It's not overheating or head cracking, thank goodness. I was accelerating from an intersection and halfway through heard a sudden, loud escape of air that sounded like a serious tire puncture. I pulled over immediately...

In search of dimensions or someone willing to sell plates to block off 2LTE EGR. Thanks let me know whats out there. Post pics of your rigs deleted egr if you have some. Thank you.

2L-TE engine for sale. Came from good running truck, no head gasket issues. COLD dry compression test: 451 450 455 500 Comes with injection pump, power steering pump, turbo and manifolds. Alternator, and AC pump not available. Being pulled form the truck to make way for 1HDT 5 speed swap combo...

Hello everyone, and happy holidays. I've found two wires on the intake side of my 2L-TE that I cannot identify, and I'm having trouble tracing. One wire is 10awg Black with orange tracer, this has a push fit terminal. The other seems to have been repaired, and is black at origin, it has a...

Hey all, happy holidays! I'm curious if anyone knows what the macimum gross fuel flow rate for the 2L-TE? I've installed a 2-micron Racor 220R with a maximum flow rate of 30gph. I've noticed my truck getting sluggish, and I'm curious if this flow rate is insufficient. I know some injection...

Hi, Wanting to know if anyone has fitted a Isuzu bighorn/ trooper (also the Holden Jackaroo) top mount intercooler to a 2lte, and if there is much improvement with it in the system. Ive seen a scoop from these installed to a LJ78 and it looked tidy, but wanting to know if i could run the...

Hello Everyone, I'm from Illinois and fresh to diesel land cruisers and ih8mud. I'm starting to gather information regarding winter prep for my turbo diesel (2LTE) LJ78 and was hoping you could steer me in the right direction. I'd like to know more about fuel additives (if needed) , oil, tires...

I am trying to mount this thing and don't have time to order the bolts. Anyone know the size of this bolt part number>90119-10367. Thanks for the help!

Just ordered a denso injector kit for my lj78 and was curious if anybody on here has any info on them. Wondering how much pressure they can handle and if they are reliable. Thanks, Ian

I wrote a couple of weeks ago that I was looking at an engine swap because I thought I might have dropped a lock washer into the air intake on my LJ78. When I put it back together and started it, after about 60 seconds it started a loud knock. I am just guessing about the washer. My mechanic has...

SOLD I just pulled this running 2L-TE from my Prado at 70,536 miles. It is complete from the fan to the bell housing, and includes the ECU and all of the associated wiring plugs (would have to be reconnected). The bell housing will bolt directly to any pre-1995 V6 5-speed (post '95 will require...

Hey again, in my urrent string of mild repairs i took the cruiser out for a drive. No issue leaving home but i noticed a significant loss in power a couple minutes later. I was only able to get to about 30KPH on a mild uphill. Im thinking its the wastegate on the trubo stuck open, but i also had...

Hi Guys I wanted to create a thread for my new 1992 LJ78. Picked it up 3 weeks ago with 110,000kms on the clock. Really tidy I am brand new to diesels, landcruisers and working on them. After reading a lot of your threads there is so much cool stuff I have seen done to LJ78's that I would...

hi all im new to the site and needing help with my 2lte surf when its cold and i start it it chugges and chuggs and will stall unless you rev it until it stops chuging (a quick rev to 3000rm will do it) snd then it idles but with a massive miss fire and if you stand about 20 metres from the...

A week or so ago I started getting a squeal until my truck is warmed up. It took a few days to figure it out but it is coming from the free wheeling tensioner that rides on the back side of the belt. I don't see an adjustment. Help?

A friend's college aged kid with a lot of miata wrenching experience needed work during summer break so I had him put a new ct20 turbo on my LJ78 with 2lte. Ever since the turbo swap I get a good 30 seconds of blue smoke on cold startup. Not on warm startup. A couple of other odd symptoms...