Long List of Parts in So.Cal.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 25, 2007
Threads
237
Messages
680
Location
S.CA - N.OC - Fullerton
Location
United States
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$44

Long List of Land Cruiser Parts fj40 fj55 landcruiser (Fullerton)

I HAVE A LOT OF OTHER PARTS SO ASK - ALL OF THE LARGER BODY PARTS I HAVE ARE LISTED - THANKS
%%%%%%%%% NO TOPS, NO DISK BRAKES, NO POWER STEERING %%%%%%%%
*********************************************************************************************** CALL 714-586-9135 OR EMAIL PM
****************************************************************************************
I'M TIRED OF PEOPLE WASTING MY TIME ASKING FOR PICTURES AND THAT'S THE LAST YOU HEAR OF THEM- SO I AM NO LONGER SENDING PICTURES - I GIVE GREAT PHONE DESCRIPTIONS SO USE THE PHONE - THANKS FOR UNDERSTANDING
****************************************************************************************
******************** F MOTOR PARTS *****************************************
air cleaner $ 50
intake manifold $20
early intake/ex combo (pre 68) $100
valve cover $20
head core $40 ******************

1986 2F MOTOR PARTS **********************************
carb core $40
complete smog setup $make offer for what you need
valve cover $25
air cleaner assembly $40
oil cooler $25
radiator $50
alternator bracket $20
electronic distributor / coil $100

*********** FJ40 PARTS *****************************************
drivers side fender $75 ******* needs minor body work (2 to choose from )
core support $20
headlight bezel $20-30
pedal assembly (for converting older 40s to disk front) $40
steering box - late model - manual $50
67 windshield frame (1 year frame) $100 -
late model hard top cross bar $80
headlight assemby $10 each
misc gas tanks - take pick $50-75
early style door glass $20
brake drum $15

**********MOTORS / AXLES / TRANSMISSIONS / TRANSFER CASES / ADAPTERS / V8 STUFF ************
F motor retrofit AC bracket with compressor core and double crank pulley $100
Ad-a-pully for ballancer or F motor $20
Empty transfer 3spd t-case $60
3-spd t-case gear set $75
misc. t-case parts and gears, $ask
72 HEAD CORE $60
4 speed bell housing $75
Lightly used 3speed clutch and flywheel $100
SOLD chevy clutch - slightly used - great condition with flywheel, fork, beraring $100
700r4 adapter to toyota 4spd t-case - thin type with t-case input shaft, includes p-brake cable extender (requires 4wd trans), $300
nv4500 adapter, to toyota 4-speed t-case, custom, well made with shifter conversion, crossmemeber/mount, $450
SOLD 3-speed transfer case with trans $250
4-speed transfer case., great shape, clean, $400
4bbl spreadbore adapter plate $20
slightly used starters $20
chevy flywheels $25
new or newer fuel pumps $15
holley aluminum valve covers $25
HEI distributor with coil and nice wires $40
3SPD trans $50
*********** RADIATORS - DRIVE SHAFTS - CARBS ******************************************* 6-8 radiators from fj40 fj55 fj60 $50-75 each
misc year stock carb cores - $40 each
carter AFB core $25
rochester 2bbl core with adapter plate $25
various stock and mod. drive shafts - early $40 - late (4spd $75)
55/40 fan shroud $40
custom v8 conversion fiberglass fan shroud $75
*********** 74 FJ55 STUFF ******************
wiring harness (dash / firewall) $25
heater controlls $30
instrument clusters $20 each
gas pedal $ 15
rear seat - needs cover- foam ok - $30
4-wheel drive emblem, $10
tailgate handle, good shape..... $20
inner taigate pannel $20
SOLD rear motor assembly and regulator $50 (you test)
GLASS - rear glass, drivers rear glass, front passenger door glass (ready to go) $25 each
 
Last edited:
Is the fiberglass fan shroud fit a stock radiator?
 
could you tell me the diameter of the opening and the distance of the lip of the opening from the core?

I want to know if my current fan blade will work with it and how far in or out the fan will sit in the opening.

Thanks
 
could you tell me the diameter of the opening and the distance of the lip of the opening from the core?

I want to know if my current fan blade will work with it and how far in or out the fan will sit in the opening.

Thanks

it's about the same thickness as stock..... what is the diam. of your fan? was busy today... i'll check it out tomorrow
 
I'll take the V8 shroud. PM me you paypal info.
 
Nv4500 adapter?- Is this an Advance Adapter product? What year/model of NV4500? Complete? Wear issues?

the plate was made by a pro machinist. he might have copied it from something. he had it working in his cruiser but pulled it out to go with something with crawl gears. i have the plate, the shaft that was a purchased part, a custom x-member with mount and the modified toyota shifter. you will need the hardware.
 
Last edited:
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$ attention $$$$$$$

i just bought a converted 28 foot city bus with a cat v8 diesel in the back. If you know your s*** and you need some parts lets barter parts for labor.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$44
 
Last edited:
*********** FJ40 PARTS *****************************************
drivers side fender $75 ******* needs minor body work (2 to choose from )
trans cover from 73 (both shifter holes, original cond.) $60
core support $20
headlight bezel $20-30
pedal assembly (for converting older 40s to disk front) $40
steering box - late model - manual $50
67 windshield frame (1 year frame) $100 -
late model hard top cross bar $80
headlight assemby $10 each
misc gas tanks - take pick $50-75
early style door glass $20
brake drum $15

is the trans cover still available ?? if so i can P/U this weekend
 
Back
Top Bottom