Build What's a Parts Guy to Do??
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #1,204
Why are you picking at the harness?
Do you have TEQ black tape to wrap it all back up
Wish I did. The electrical tape used by Yazaki on these harnesses is pretty impressive. Still sticky and gooey 30 yrs later.
But no.
3M professional grade stuff going back on.
- Thread starter
- #1,205
So as the hole deepens, each component system in the HVAC system writ large will be addressed. Tonight was the blower motor and housing.
This nasty mess:
First get it out and then start disassembly:
In the kitchen counter top (this is where the married guys might want to stop less they find themselves and their 60 on the stoop after the divorce as that's all they have left...
):
Nasty:
Taking her apart:
This nasty mess:
First get it out and then start disassembly:
In the kitchen counter top (this is where the married guys might want to stop less they find themselves and their 60 on the stoop after the divorce as that's all they have left...
):Nasty:
Taking her apart:
Use elliot tape to rewrap. It's what coolerman uses.
- Thread starter
- #1,207
Old fashioned cleaning with warm water and Palmolive:
More disassembly and cleaning:
Drying properly:
Blend doors after getting the 30 yr old nasty foam off:
All the bits and pieces cleaned and ready:
More disassembly and cleaning:
Drying properly:
Blend doors after getting the 30 yr old nasty foam off:
All the bits and pieces cleaned and ready:
- Thread starter
- #1,208
Blend doors received new foam compliments of Toyota Gosei:
And how it will look in the assembly in both positions:
Looks almost as good as it was from the factory. Maybe better.
Anyway, now to assemble the thing back together for eventual re-entry.
And how it will look in the assembly in both positions:
Looks almost as good as it was from the factory. Maybe better.
Anyway, now to assemble the thing back together for eventual re-entry.
I will demand a report. If successful, I will be ordering some myself.
I have used Super 88+ to wrap all of my harnesses, and while it has worked well, I don't like it being even a little bit sticky under there if I unwrap it--The factory harness isn't, after all.
Dan
Onur, is that foam the same that you used on the surrounds for the vents earlier (where the white foam from Lowe's didn't work)...enough from one kit?
Jebus Onur...I see old del maguey lives for another night 
- Thread starter
- #1,216
Jebus Onur...I see old del maguey lives for another night
I'm keeping it for when this thing starts.... Then old Jos-B might make an appearance!
Got your box by the way. I'll take care of that Monday morning.
lov'n the clean air new diverter foam BTW...
...one trip through nevada will take care of that
...one trip through nevada will take care of that
Onur sure knows how to have a wild Saturday night. I like the beverage options on the table in the background.
- Joined
- Jul 22, 2012
- Threads
- 630
- Messages
- 17,204
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
Places to order Toyota parts from Beno: Phone, E-mail, Mud PM, and his personal build thread.