What Did You Do with Your 80 This Weekend? (47 Viewers)

[gsi18867]

So assistance needed for a rookie, should I just try tighten bolts a little bit and clean off to see what happens or do I need to replace something?

View attachment 1539919

I can get better pic later if needed

Whole pan's gonna have to come off, maybe the upper pan.

 

[Box Rocket]

So assistance needed for a rookie, should I just try tighten bolts a little bit and clean off to see what happens or do I need to replace something?

View attachment 1539919

I can get better pic later if needed

You need to see where the leak is actually coming from. Could be a front crank seal or other area that is running back to that point.

 

[artech]

That's factory rustproofin' right theah.

Just need to add a little oil once in a while.

 

[Stuckinthe80s]

Installed lift, new tires on blacked out FJ wheels, sanded the body down for Raptor liner prep.

 

[haulin auss]

Continued work on a whole slew of interior mods for an upcoming road trip...

• New 'black' wood grain trim
• Relocated CDL button to the left of the wheel
• Mounted ScanGuage on switch blanks
• Installed fire extinguisher mount and lockbox
• Installed Mag Light mount and lockbox
• Passenger Chair Lift installed
• Painted center console black and installed some RAM mounts
• 3x 5a USB chargers
• Center console lockbox
• 2x APU's in console
• Hella map light
• Made wiring harness pig tails for 6 factory defogger switches
• Cup holders!

Still need to label and wire up the factory switches to the sPOD, install the 300w pure sine inverter, wire up the FEM mount buttons, install the flush CB, and it goes on and on

 

[NLXTACY]

Continued work on a whole slew of interior mods for an upcoming road trip...

• New 'black' wood grain trim
• Relocated CDL button to the left of the wheel
• Mounted ScanGuage on switch blanks
• Installed fire extinguisher mount and lockbox
• Installed Mag Light mount and lockbox
• Passenger Chair Lift installed
• Painted center console black and installed some RAM mounts
• 3x 5a USB chargers
• Center console lockbox
• 2x APU's in console
• Hella map light
• Made wiring harness pig tails for 6 factory defogger switches
• Cup holders!

Still need to label and wire up the factory switches to the sPOD, install the 300w pure sine inverter, wire up the FEM mount buttons, install the flush CB, and it goes on and on

View attachment 1540217
View attachment 1540216
View attachment 1540214
View attachment 1540218
View attachment 1540219

Hey! Nice work. Hopefully the WE stuff lives up to the hype

 

[baldilocks]

Went to Moab and broke the RR Nitro axle right here on Golden Spike trail. The next morning I ordered a new shaft from just differentials to be shipped over night to Moab 4x4 outpost arriving today at noon. Instead it arrived at my house in CA at noon today. Had to re-Oder and sit on the sidelines another day. I'm considering a razor rental for tomorrow.

 

[haulin auss]

Hey! Nice work. Hopefully the WE stuff lives up to the hype

Especially that extremely rare, front-square-cubby-cup-holder-thing WE liner...

Didn't you say awhile back that you may be working on some replacement factory switch labels!? Feeling lazy about making my own...

 

[Dissent]

Continued work on a whole slew of interior mods for an upcoming road trip...

• New 'black' wood grain trim
• Relocated CDL button to the left of the wheel
• Mounted ScanGuage on switch blanks
• Installed fire extinguisher mount and lockbox
• Installed Mag Light mount and lockbox
• Passenger Chair Lift installed
• Painted center console black and installed some RAM mounts
• 3x 5a USB chargers
• Center console lockbox
• 2x APU's in console
• Hella map light
• Made wiring harness pig tails for 6 factory defogger switches
• Cup holders!

Still need to label and wire up the factory switches to the sPOD, install the 300w pure sine inverter, wire up the FEM mount buttons, install the flush CB, and it goes on and on

View attachment 1540217
View attachment 1540216
View attachment 1540214
View attachment 1540218
View attachment 1540219

What's the device on the driver's side of the console with the squiggles on it?

 

[retrofive]

What's the device on the driver's side of the console with the squiggles on it?

Looks like a magnetic mount?

 

[Marine7]

Looks like a magnetic mount?

Magic Mount! Best cell phone holder/tablet holder/Baefeng radio holder I've found.

 

[retrofive]

Magic Mount! Best cell phone holder/tablet holder/Baefeng radio holder I've found.

They are pretty slick.

 

[haulin auss]

What's the device on the driver's side of the console with the squiggles on it?

Looks like a magnetic mount?

Magic Mount! Best cell phone holder/tablet holder/Baefeng radio holder I've found.

Bingo. Use that one to hold my CB mic and another near the parking brake to hold my radio remote.

Amazon: https://goo.gl/MgkT7o

 

[LandCruiserPhil]

Prototype rain fly/awning for the rear window of my CampTeq using my mad sewing skills

 

[JR Transmission]

Chopped the front. Driver side tomorrow

View attachment 1538424 View attachment 1538425

bright pic would be great

 

[Dissent]

Magic Mount! Best cell phone holder/tablet holder/Baefeng radio holder I've found.

Thanks, I'll look into it. Very nice work on the upgrades. I have a red dome LED light so I'm eyeballing that Hella goose neck light for task lighting.

 

[dcguillory]

View attachment 1540226 Went to Moab and broke the RR Nitro axle right here on Golden Spike trail. The next morning I ordered a new shaft from just differentials to be shipped over night to Moab 4x4 outpost arriving today at noon. Instead it arrived at my house in CA at noon today. Had to re-Oder and sit on the sidelines another day. I'm considering a razor rental for tomorrow.

Rent that razor! Super fun plus you get to roll up to the Chinese food restaurant in it.

 

[Comet]

Looked at it next to my other obsession. Comet and Buster Brown hangin' in the back yard.

 

[baldilocks]

Rent that razor! Super fun plus you get to roll up to the Chinese food restaurant in it.

They want $319/day for a 900cc two seater. I think I will opt for the $39 corolla and drive to canyon lands and take pics from the road. The 80 should be on Hells Revenge Thursday.

 

[LandCruiserPhil]

They want $319/day for a 900cc two seater. I think I will opt for the $39 corolla and drive to canyon lands and take pics from the road. The 80 should be on Hells Revenge Thursday.

Pre run Hells with the Corolla