Transfer Case Gearing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 28, 2010
Threads
136
Messages
813
Location
FOG TOWN->SF<-
Just been through the Con and these are very capable machines. But seriously the 3.1 transfer case gearing I really don't think it will cut it, with my 4.88 and 35's.

We need a 4.7 or a doubler.

Is there any way we can maybe fit a 5 speed manual from I don't know what vehicle, and run a doubler from the mintrucks or tacomas?
 
You can fit most things into most things, so if you're willing to change transmissions, you may fit a doubler onto a reworked driveline. Another option might be using the 3.1:1 transfer case gears with really low R&P gears. Then use an overdrive gear on the high range if you don't have huge tires. That might get you to the gearing you want without completely reworking your drive train. Transfer case re-gearing
 
...or you could wait until they make this. DoUbLEr!!!! (I have stopped holding my breath.)
 
Just been through the Con and these are very capable machines. But seriously the 3.1 transfer case gearing I really don't think it will cut it, with my 4.88 and 35's.

We need a 4.7 or a doubler.

Is there any way we can maybe fit a 5 speed manual from I don't know what vehicle, and run a doubler from the mintrucks or tacomas?
Get the t case gears and call it good. Lower would be nice but honestly I can only see myself wanting another 20% lower overall - not 100%
 
Get the t case gears and call it good. Lower would be nice but honestly I can only see myself wanting another 20% lower overall - not 100%

You've never owned a 1st gen with a dual case (2.28 front case, 4.7 rear case, 10.1 in low low) . There is virtually no downside to having more gearing with a doubler (a single case is a different story because you maybe too low). Lack of gearing is the main reason I have given up on the 80 as a serious rock crawler and ended up purchasing a 1st gen 4runner as well as the 80. You simply don't have the control you need over the weight and size of the 80. I'm also not the give it more gas type, slow underpowered crawling with really low gears is more of my style.

To the OP, I've heard of people using a fj60 split case behind an overseas manual, however, this seems like a lot of work. Also, ive heard of people using an atlas behind an LS swap. Or you can just find a pair of volvo portal axles and call it good, lol.

The main problem with the 80 is that the transfer case is offset and not centered. There doesnt seem to be a good way to add a doubler with that setup. Also, anytime you decide to do anything with the t cass the gas tank gets in the way. I hope you come up with a good solution, but I wasn't able to think of anything economical. It was cheaper to buy a beater 1st gen then throw more at the 80.
 
You've never owned a 1st gen with a dual case (2.28 front case, 4.7 rear case, 10.1 in low low) . There is virtually no downside to having more gearing with a doubler (a single case is a different story because you maybe too low). Lack of gearing is the main reason I have given up on the 80 as a serious rock crawler and ended up purchasing a 1st gen 4runner as well as the 80. You simply don't have the control you need over the weight and size of the 80. I'm also not the give it more gas type, slow underpowered crawling with really low gears is more of my style.

To the OP, I've heard of people using a fj60 split case behind an overseas manual, however, this seems like a lot of work. Also, ive heard of people using an atlas behind an LS swap. Or you can just find a pair of volvo portal axles and call it good, lol.

The main problem with the 80 is that the transfer case is offset and not centered. There doesnt seem to be a good way to add a doubler with that setup. Also, anytime you decide to do anything with the t cass the gas tank gets in the way. I hope you come up with a good solution, but I wasn't able to think of anything economical. It was cheaper to buy a beater 1st gen then throw more at the 80.

True, I haven't driven with ridiculously low gearing, but I've driven a lot of the more difficult trails without needing one. Also, all serious competitive rigs dont' use 19 billion transfer cases. A very common setup is a 3:1 atlas, etc. So, to me, I think the transmission gearing could be a little lower (6L80 - 4:1 1st gear instead of 2.8:1) and it would make everything tractable without the need for a doubler.

If a doubler was available, would I buy one? Maybe. Does it mean you can't have a "hardcore" 80 without it? Only if you can't drive :)
 
True, I haven't driven with ridiculously low gearing, but I've driven a lot of the more difficult trails without needing one. Also, all serious competitive rigs dont' use 19 billion transfer cases. A very common setup is a 3:1 atlas, etc. So, to me, I think the transmission gearing could be a little lower (6L80 - 4:1 1st gear instead of 2.8:1) and it would make everything tractable without the need for a doubler.

If a doubler was available, would I buy one? Maybe. Does it mean you can't have a "hardcore" 80 without it? Only if you can't drive :)

No one said you can't, but the same goes for bigger tires, stronger axles, lockers etc. No amount of toys makes up for driver skill, I agree with you on that. Having the gears makes driving a lot easier and dollar for dollar (at least on a 1st gen) the best upgrade you can do. I've wheeled my 80 on some hammer trails and I've wheeled my 4runner as well. It's a whole lot easier in the 4runner. No one said you can't in an 80, but to me it's just not nearly as much fun.

Also, comp rigs are in a hurry and cost a lot of money. If i were strapped into a cab with no ability to lean out or get out and assess then I'd choose horsepower and big axles all day long. Most of us don't have the dollars or desire to build a comp rig. Apple's to oranges comparison there.
 
No one said you can't, but the same goes for bigger tires, stronger axles, lockers etc. No amount of toys makes up for driver skill, I agree with you on that. Having the gears makes driving a lot easier and dollar for dollar (at least on a 1st gen) the best upgrade you can do. I've wheeled my 80 on some hammer trails and I've wheeled my 4runner as well. It's a whole lot easier in the 4runner. No one said you can't in an 80, but to me it's just not nearly as much fun.

Also, comp rigs are in a hurry and cost a lot of money. If i were strapped into a cab with no ability to lean out or get out and assess then I'd choose horsepower and big axles all day long. Most of us don't have the dollars or desire to build a comp rig. Apple's to oranges comparison there.
Fair enough. I think we may have to agree to disagree based on driving style? My problem with the 80 on Outer Limits, for example, had nothing to do with gear ratio and everything to do with the whole sheet metal area known as the "body." A doubler wouldn't make it as nimble as a 1st gen 4runner but I didn't have problems creeping up obstacles or anything.
 
Hmm, I'll have to take a look at your suspension. My 80 just kept slipping and I had problems getting traction (all 4 wheels turning but not climbing). I'm sensitive to adding too much throttle since I've broken one front ring and pinion. More power to you for rocking an 80 thru those trails, you're a better man than I. Have you been up Sledge with the 80?
 
Hmm, I'll have to take a look at your suspension. My 80 just kept slipping and I had problems getting traction (all 4 wheels turning but not climbing). I'm sensitive to adding too much throttle since I've broken one front ring and pinion. More power to you for rocking an 80 thru those trails, you're a better man than I. Have you been up Sledge with the 80?

Yep - twice. But I had ditched the radius arms within 6 months of ownership so I had more articulation and likely a little bit better traction as a result.
h562Jd5.jpg


First time was rough because I was keeping the body out of the rocks. The second time, eh, not so bad. The trails do change a lot each time so you should give it another shot.

rest of build thread (note: i started this a few days ago and haven't documented the axle swap yet) Marshmallow's build thread
 
IMG_8695.webp
Have lockers in the rear and don't think that was the issue.

The issue was trying to climb an obstacle. The torque converter locks at roughly around 1.2k. It idels at .8k. You have to feather the gas I order to move forward. Any more gas than necessary then your lurching forward. Which will cause you to bang an move faster than you want which can lead to damage. I turned on my a/c in order to keep me hovering around the 1k, helped a little.

Also, does anyone maybe make a speed controller for these, like I said it could help on a technical trail like the fzj80. Would have been great if I could set it at maybe 1.5 k and not rely on my foot to keep it there.

Nukegoat, yeah, like I said they are very capable machines, love the pic of yours and they can flex their muscles.

But, gearing is the only drawback for these 80's and is making me look elsewhere (don't really want to) to feed my thrill level as the rubicon was the start of opening my eyes to rock crawling, maybe minitruck street legal (crawler).

So maybe keep the 80 for the long expo stuff and have the crawler to drive in and out of the harder stuff like fordyce.

Has anyone taken an 80 for fordyce? I love the 80 but don't want to turn it into a crushed beer can.
 
View attachment 1536137 Have lockers in the rear and don't think that was the issue.

The issue was trying to climb an obstacle. The torque converter locks at roughly around 1.2k. It idels at .8k. You have to feather the gas I order to move forward. Any more gas than necessary then your lurching forward. Which will cause you to bang an move faster than you want which can lead to damage. I turned on my a/c in order to keep me hovering around the 1k, helped a little.

Also, does anyone maybe make a speed controller for these, like I said it could help on a technical trail like the fzj80. Would have been great if I could set it at maybe 1.5 k and not rely on my foot to keep it there.

Nukegoat, yeah, like I said they are very capable machines, love the pic of yours and they can flex their muscles.

But, gearing is the only drawback for these 80's and is making me look elsewhere (don't really want to) to feed my thrill level as the rubicon was the start of opening my eyes to rock crawling, maybe minitruck street legal (crawler).

So maybe keep the 80 for the long expo stuff and have the crawler to drive in and out of the harder stuff like fordyce.

Has anyone taken an 80 for fordyce? I love the 80 but don't want to turn it into a crushed beer can.

First, on that obstacle, I'd say you're taking the wrong line. Here's a video of me running the same spot:



As for your second question, I've run Fordyce twice. And I've seen @jcardona1 there, too. Both of us are linked in the front but if you take the bypasses on the winch hills you could probably get a radius arm'd cruiser through there with some good driving.
 
  • Like
Reactions: MoJ
That was the only line out there. On the other side of the tree was a 3-4 foot drop which leaned you up to the opposing rock. That's why I'm leaned over so much.
You can see in the picture how you went straight and I had to hug the tree.
 
Also, does anyone maybe make a speed controller for these, like I said it could help on a technical trail like the fzj80. Would have been great if I could set it at maybe 1.5 k and not rely on my foot to keep it there.

You might look into the hand throttle mod, either with factory parts or Toro lawn mower stuff.
 
ive only had a couple times where a lower gear ratio than the 5,29 and 3.1 needed more
hand throttle is a must! I know if I dont like my new gear setup ill be ditching my marks adapter and getting NWF to custom fab me the 4l80e to toyota tcase adapter
 
Thanks toyotadon, just ordered the toro throttle on fleebay as I'm scheduled on going out to the con again the end of this month.

This mod should help tremendously when crawling. Maybe install the 3.1 as I have the gears sitting on my shelf.
 
There is already a 4L80E to Toyota transfercase adapter.

ive only had a couple times where a lower gear ratio than the 5,29 and 3.1 needed more
hand throttle is a must! I know if I dont like my new gear setup ill be ditching my marks adapter and getting NWF to custom fab me the 4l80e to toyota tcase adapter
 
My V860 series was 38:1 with 33's compared to my 80 series with 3.1 gears 25:1 and 35's is day and night. I find the need to left foot brake much more in the 80 than the 60. Its not a big problem given the vehicle and the trails I run but I would really like the additional safety the lower gears provide on steep descents.


IMG_5827[1].webp
 
Back
Top Bottom