Stainless Steel Hardware...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 12, 2005
Threads
59
Messages
259
Website
www.geocities.com
Hello All,
I have purchased my first FJ40 - it's a 1970 machine, and I have completed stripping the paint and am about to start spraying...

When I was stripping the cruiser some of the nuts and bolts were seized, some broke, some I had to grind, and some came off. My question is...Is there a way to find a stainless steel bolt kit? Or would someone know the bolt sizes so a guy could call a manufacturer to special order replacement stainless steel bolts?

Thanks for your time...
Cheers@!
 
http://www.boltdepot.com/


There are others, but this site has a lot of pics. Bulk is so much cheaper, if you can afford it initially. Use what you need and sell the rest.

GL

Ed
 
iam_turner said:
When I was stripping the cruiser some of the nuts and bolts were seized, some broke, some I had to grind, and some came off. My question is...Is there a way to find a stainless steel bolt kit?

Really ... stuck, rusty bolts ... on an old Land Cruiser. Never heard of that before :grinpimp:

I bought all my stainless at http://www.mcmaster.com/. I went with allen head cap screws for bolts on the outside of the truck (hinges, doors, etc). Pretty cheap when bought by the box. They will have just about anything you want. And the nice thing is they don't screw you on shipping, and they ship fast.
 
SOR has stainless kits for specific apps like fenders, etc but they are $$$. For windshield and hood hardware paranoid fabrications on this board has a resonably priced allen head bolt kit. Other than that, Fastenal sometimes will compete with online supply houses but most onlines ship for free. Lots of options out there, just depends if you want to keep them in your inventory or just buy a kit for your projects.
 
if you insist on using ss bolts with ss nuts, make sure you use some type of anti seize. they'll gall up quicker than s***.
 
just find a local fastener supply and go in and buy whatever you need. It is up to you to know what you need. Boat places have them too but can be spendy.
 
Totally stainless has every bolt needed for a cruiser, and they specialize in hot rods so the quantities are around what you actually need instead of becoming the next stainless supply guy on the web.

I used a local supply house, they were great at getting what I needed and it seemed like I was always buying their leftovers and they would give me killer deals. When they sell like 1000 lbs of a certain bolt and I only need like 15 they seem to just give to me.

Like others have said, use antisieze. I have been using it for 5 years now and it has already made a difference.

Welcome... for what it is worth... we all love pics! Show us your rig!

Rezarf <><
 
Hello,
The reason that the original hardware was corroded in was due to the sacrifical plating had exhausted itself. Stainless hardware will cause the base metal(your truck) to corrode , albeit at a slower rate. The rate of corrosion is determined by the surface area of the dissimilar metals. I have been removing all of the stainless hardware that the P/O installed, most is already gone. Do a google search on dissimilar metal corrosion and decide for yourself. The amount of corrosion that I have found under the bolt heads on my cruiser was disturbing, the bolts looked good though.
Otter
 
Back
Top Bottom