Lockers ???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 14, 2006
Threads
123
Messages
1,108
Location
Central Cali
OK, From what i get everyone prfers the 4'' lift or the springover for my 77fj40, and alot have said it needs lockers or lockers would be recommended ? what works best ? lockrite or ARB or ? i am new to this fj thing so any info is needed. and i will post pic's of the new toy this weekend.

CHEERS ! :beer:

Also, what gears are in that 77 of mine ?
 
Need more info. What are your plans/intentions? Is this a trailer queen, trail rig only, or dd, or dd/trail rig? What size tires are you planning on running? What gearing options are you going to put in? Ie, stock tranny/case or upgrades?
 
x2

but your on the right track, figure out what youll use your rig for and what your budget is.

oh yeah


SOA no other way
 
FJ40 MNTCRZR said:
Also, what gears are in that 77 of mine ?

Welcome.




Stock rear and front diff gears would be 4:11


Lok-rite/aussie work well and are cheap.


ARB's are nice also, but more cash as they are selectable.


Will this be a trail beater or street and trail truck?


Properly welded diffs work well also for many people.


Good luck!


-Steve
 
Im thinking of 2-1/2'' ole man emu with 33's and yes stock trans, i will be driving on road and trail rig, i live in the central california area, rocks and creek crawling.
 
i run the cheapo aussie locker, i have been impressed, it is good for a dd and trail rig, just takes a little time to get used to it
 
don't do a spring over until you KNOW for yourself that it's what you want.
 
I'll sell you my welded and trail tested rear complete w/ stock gears. The only issue you'd have is you're fine spline pinion. Swap the carrier from mine w/ yours and you'd have a full spare axle "Just in case". PM if you're interested. I'll have the axle pulled in the next 2 weeks.
 
campy said:
I'll sell you my welded and trail tested rear complete w/ stock gears. The only issue you'd have is you're fine spline pinion.






4:11's did not get a fine spline pinion until 1978.


:beer:
 
:whoops: ;)
 
The aussie lockers ? where can ya get them ? who, what ,where ? Also what kind of rear end is in that 77 ? dana ? or ?

thanks for all the info, im getting schooled ....

CHEERS !
 
search








































just kidding,

look in the vendor section and try offroadlockers.com
i think thats the website
correct me if im wrong
 
everyone prfers the 4'' lift or the springover for my 77fj40

Who cares what *everyone prefers? It's YOUR truck. Don't run with the sheeple crowd & be satisfied with the stock suspension or different variations of old skool leafs. Why not readup on link style suspensions? Then make your decision based on your goals for the truck, budget, & others' experiences with each type of suspension. JMHO.....
 
LC_Hamma said:
everyone prfers the 4'' lift or the springover for my 77fj40

Who cares what *everyone prefers? It's YOUR truck. Don't run with the sheeple crowd & be satisfied with the stock suspension or different variations of old skool leafs. Why not readup on link style suspensions? Then make your decision based on your goals for the truck, budget, & others' experiences with each type of suspension. JMHO.....


X2

I like my SOA but it is not for everyone. Some people like having all 4 wheels on the ground when going around a curve.:D
 
So true, it is my decision on what's going in, i just want to get as much advise about these things as possible.

I THOUGHT WHEN YOU OWN A CRUISER MONEY DOES NOT MATTER ? ...:flipoff2:


CHEERS ......:beer:
 
FJ40 MNTCRZR said:
So true, it is my decision on what's going in, i just want to get as much advise about these things as possible.

I THOUGHT WHEN YOU OWN A CRUISER MONEY DOES NOT MATTER ? ...:flipoff2:


CHEERS ......:beer:

That would be true for ANY hobby that includes a motorized vehicle. Yeah, link suspensions cost a little more but the whole key is how deep do you want to go into your hobby? Do you want to sacrifice the time to LEARN about an advanced suspension design or just slap on some leafs & call it good? Have fun either way!
 
Quite Honestly

You may want to find some locals in your area and see what they're doing compared to what you're trying to achieve. I wheeled my cruiser stock w/ 31's for over a year, while my buddies all had pimped rigs. Constantly checking out other peoples rig/designs and weighed what my wallet could handle. I finally welded up the rear before last season, and that was a huge difference for me. Then again, I already did SOA, 213:1 crawling, and 35's.
 
OK, next question or do i need a new thread ? i want POWER STEERING PLEASE ... this manuel stuff is killin me here :ban: PLEASE HELP , a guy over at marlin crawler sd i can get a chevy power steering unit it needs a number stamped on ? 79 rings a bell ..? is this true and how hard is the power steering conversion ?


CHEERS .....:beer: :beer:
 
FJ40 MNTCRZR said:
POWER STEERING PLEASE ... this manuel stuff is killin me here :ban:

well, how would I know, according to you, I must be dead by now :rolleyes:

I wheel my truck with manual steering ;)
 
Back
Top Bottom