Hard Top removal???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It's not heavy, it's big. And if it still has the full length bars in the door channels ('bout 8"), you will need help. --unless you enjoy large scrapes in the paint.
 
I know I have seen an article about this out there... (I thought it was on our tech page!)

Anyway, here is roughly how I do it...

1- Remove ambulance doors (mine is a 78)

2- Crawl in back and remove all top-to-tub bolts

3- Remove bolts that hold door pillars into tubs

4- Moving forward, unscrew phillips head screws that mount top to windsheild frame

5- Disco the wire for your hardtop light

6- Remove bolts on the outside above the windsheild

7- With help from friends, or winch, or cherry picker, lift top off - be careful those door posts are LONG!!!

8- Fold windsheild forward

9- Beat door pins out, remove front doors.

HTH,
 
one friend on each rear corner(only costs me acouple o' beers to get them
over),stand inside, right behind roll bar,with your back aginst the roof.push up and walk out the back..don't try this with your wife and daughter if there short like mine.lots o yellin' and scratched paint...

good luck with cali,and be careful
 
It can be done with one person if you are one tall mofo and it sits at stock height. Usually it takes at least you and one other person to be able to manuever the bitch past the roll bar. All it is nuts and bolts takes about 30 - 45 min if you are new to it. If you have power tools it can be a 15 min job, of course whenever I put my hard top back on fewer and fewer bolts seem to make it back on ;p
 
Macgyver5 said:
oh yeah and does anyone know if it is illegal to drive around without doors in Califonia???

its legal .... i run no top or doors its the So Cal way
 
so it's off Man it was a bit** though it ended up taking two of us one to lift the other to navigate but it was sucsessul now I got a week or so before I have to put it back on yea!!!
 
You have it off, but I thought I would still share how I do it.

I BACK my 40 into the garage.

I then string 2 ratchet straps over the rafters so they meet at the post and the rear corner on each side.

I then, after the bolts are removed, slightly prop up the corners of the top so I can get the hooks under the top, and then ratchet away.

Voila', the top is now off, and the cool thing is I can still use my garage with the top hanging from the rafters. I just pull in FORWARD, and the front end fits into the top perfectly. That is why BACKING in is important in the first step, and also because if it is still hanging from the rafters you probably couldn't get out of the garage :)
 
I would love to leave it off but I live in Santa Cruz and I belive we still have some rain left in the season so I'll be needing it to stay dry but I do love it with it off and no doors....very free.....this go around was more of an experiment to see what it was like taking it off and to enjoy the week of nice weather to come....oh and I thought I'd mention that mine only had four bolts to remove the top...hehe...looks like what you guys were talking about is true....oh less for me to have to put on...Thanks for the help everyone!
 
"I then, after the bolts are removed, slightly prop up the corners of the top so I can get the hooks under the top, and then ratchet away."

hey v dawg what happens when you put the top back on? dont those ratchet straps undo real fast, they dont click lose like they tighten do they? i like the idea im just wondering if it goes on as easy as it comes off. thinking of doing it.
 
My method:
DSCN2530 (Small).webp
 
For putting it back on I highly recomend a couple of 2x4's or 4x4's placed across the back of the cruiser parallel to the dash until you get the posts back in the holes. It can save you some fingers.
 
Back
Top Bottom