Another quesion is anyone bringing any High Speed Rotary Tools ( Dremel ) Great for cleaning out the old bushings in the spring hangers ? I have a small one if not
Hamom for father of soldier killed in Iraq- Part Un
- Thread starter smkymntn
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Southeast Overland
Get lost! Go explore!
Guys - we need a chop saw and notcher at the event. Can someone bring those?
No we just needed the bumperettes and the brake light mounting rings. We are just going to remove the bumper that is on it.
Southeast Overland
Get lost! Go explore!
10-4, I have bumperettes at my house.
I have some taillights I am bringing so between these and what you have you should be set Does anyone have pictures of the seats your using there was something about needing another seat bracket ? I could also look for that if I know what seats you got
Southeast Overland
Get lost! Go explore!
I am really wishing I could be there for this!!!! make sure one person taking lots of photos for us too far away
Southeast Overland
Get lost! Go explore!
Hey - I'm picking landcrusher909 up at the airport!
We will have two magazine articles off of this build, so don't worry!
orangefj45
Supporting Vendor
Just got back from the local ups hub. The following parts will be there on Thursday:
complete rear spare tire carrier with hinges, hook and latch
a few front and rear wheel studs
complete ebrake assy
HTH
georg @ valley hybrids
complete rear spare tire carrier with hinges, hook and latch
a few front and rear wheel studs
complete ebrake assy
HTH
georg @ valley hybrids
Southeast Overland
Get lost! Go explore!
Georg - did you ship those to Watkinsville or Travelers Rest?
Hey - I'm picking landcrusher909 up at the airport!
I have been asked to never cross the GA state line again...
Southeast Overland
Get lost! Go explore!
I have been asked to never cross the GA state line again...
Just step over it, not on it, and you should be OK.
orangefj45
Supporting Vendor
Parts will arrive in watkinsville.
Fwiw, making another trip to the post office tonight, sending out some front bumper brackets and a couple of sets of spindle lock kits as well.
Georg @ valley hybrids
The Metal-tech Profile Full roll cage kit just left the shop. I bent it up personally for Jackson this morning. Custom Metal-tech 2" 0.120" wall DOM-SRA tubing should keep the little guy safe. He has handles, over head bars and front and rear frame ties packed in there as well.
For the volunteers, there is a 24" x 24" x 24" box for them. We have some Metal-tech T-shirts, one of our blue button down work shirts, one case (24) of our pint glasses and three lbs of our custom roasted Metal-tech Fabricator blend coffee. The coffee was just roasted next door this AM so it is about as fresh as you can get. (custom roasted for our shop, its a strong full bodied coffee with a full caffeine hit. What we use to stay up all night working on a deadline. Not for tea drinkers, unless you want to pull them out of a tree.)
Everything is shipping into ACC and will hit their door on Friday. Thank you to Mike and Brian for taking all the parts up to the build.
Be safe everyone!
Mark
For the volunteers, there is a 24" x 24" x 24" box for them. We have some Metal-tech T-shirts, one of our blue button down work shirts, one case (24) of our pint glasses and three lbs of our custom roasted Metal-tech Fabricator blend coffee. The coffee was just roasted next door this AM so it is about as fresh as you can get. (custom roasted for our shop, its a strong full bodied coffee with a full caffeine hit. What we use to stay up all night working on a deadline. Not for tea drinkers, unless you want to pull them out of a tree.)
Everything is shipping into ACC and will hit their door on Friday. Thank you to Mike and Brian for taking all the parts up to the build.
Be safe everyone!
Mark
I'll bring a good Old Millwake drill, along with Dremel tools, Dewalt Sawzall/ drill/ Radio, Some JackStands, Rags, and lots of odds and ends parts. If the parts aren't needed on the rig I'll sell to the highest bidder and donate$$$. I have a 3/4 ton duramax and I'll load it up with my junk!!!
The Dog
The Dog
Southeast Overland
Get lost! Go explore!
Thanks MetalTech and HENDOG! I can't wait to try out the coffee. I still have my MetalTech pint glasses from two and three GSMTRs ago. They are sweet!
Also talked to Rick Arflin at Ralph Hayes Toyota today. He is shipping some new OEM parts for the build! Make sure to call Rick if you need parts. He gives a 25% discount to MUD members. Thanks Rick!
Also talked to Rick Arflin at Ralph Hayes Toyota today. He is shipping some new OEM parts for the build! Make sure to call Rick if you need parts. He gives a 25% discount to MUD members. Thanks Rick!
This is unbelieveably awesome. Maybe I should provide name tags so everyone (read: me) can place names with faces this weekend. I will be forever in ya'll debt. Thank you so much.
See you this weekend.
See you this weekend.
While we may have some shirts available at the event, the sizes and quantities are limited. If you did not order a shirt before the cutoff date, please post up in https://forum.ih8mud.com/clothing-c...er-fallen-soldier-t-shirts-2.html#post5147564 and let me know of your interest. We need a few more to have enough for a second run. Thanks in advance!
