EMS Exhaust Drone

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 1, 2011
Threads
16
Messages
131
Location
Breckenridge, CO
So, I installed the full cat back, stainless steel exhaust system from EMS a few weeks ago. Single cat, magnaflow muffler, no resonator. Like many, I quickly realize that it is WAY too loud. Don't get me wrong, I love a good exhaust note. I drive an old '93 Chevy turbo diesel with a mandrel bent 3.5" exhaust and love the deep rumble. But seriously, I drove for several weeks with the exhaust "as is" and one can't even carry on a conversation in the vehicle because the drone it too loud on the highway.

Anywho, I ordered the Moroso Spiral Flow exhaust resonator and installed that last week. I live in a small town with no one to TIG weld the resonator in, so I ordered identical clamps that EMS includes and had the small diameter end of the resonator enlarged to slide over the existing exhaust pipe.

Just drove 500 miles this weekend and I still can't hear my own thoughts in the drivers seat with the windows up! It's not so bad with windows down at 55mph...but windows up at 70. YIKES! I am driving from East Texas to Denver this weekend in the LX450 and I AM NOT looking forward to the headache I will be having if I don't fix this ASAP!:bang::bang::bang:

Several thoughts on the matter.
1. When I installed the spiral flow, I noticed that the junction between the o2 sensor pipe and the muffler was loose. I tightened the clamp as much as I possibly could and I can still rotate the pipes. It's not clamping anything! I cut up several aluminum soda cans and used them as shims, but I'm still getting black soot leaking from this clamp spot.

Are these joints and clamps just horrible, and I should invest in the cheap exhaust clamps that pinch the pipes? Or perhaps install a wrap around the existing clamps?

2. This system is designed to bolt onto the car in several spots. I know the flexpipe is in there which is supposed to help with this, but I am skeptical of bolting an exhaust system metal to metal. Is this a design flaw? Is this causing the giant cavern that is the LX interior, to become a resonator that I am sitting in?

Please help. I have now dropped almost $1,500 into the world's prettiest custom LX exhuast...and I'm ready to chunk it out the window! You know it's sad when you take off from a stop light and people are looking around for the pimped out rice rocket...Oh, no...it's just my beefy LX450...:doh:
 
Subscribed.

I am (or should I saw WAS) considering purchasing this system for my 80. I will wait and see what your final outcome is before I make a move.
 
I ordered my EMS exhaust with their resonator. It's certainly louder than stock but I've been very pleased with the system and the service from EMS. Not sure it makes a difference but I got the dual cat setup.
 
Doesn't Baktash offer a version that has a silencer installed to eliminate any drone?

My 3" exhaust was hard mounted (with no flex joint) for a decade with no noise issues (it also had a silencer) until the 10 year old headers sprung a leak.
 
you should contact baktash, he'll help you out. And maybe if you are driving, you could swing by the shop in Austin and he could look at it. A little out of the way, but you would have it fixed
 
the silencer EMS welds in the pipe is a bit of a flow restrictor, hence me going with the Moroso spiral flow resonator. Something must be quite wrong, because it is quite literally impossible to carry on a conversation above 60mph! Stopping in Austin is pretty far out of the way and we are under a bit of a time crunch with an already paid for condo rental...
 
I have a thousand miles on mine, single cat, no silencer and I have no issues and no complaints of noise at all. I think maybe you have an exhaust leak at the joint you are having soot at that is causing your noise problems
 
the silencer EMS welds in the pipe is a bit of a flow restrictor, hence me going with the Moroso spiral flow resonator. Something must be quite wrong, because it is quite literally impossible to carry on a conversation above 60mph! Stopping in Austin is pretty far out of the way and we are under a bit of a time crunch with an already paid for condo rental...
Mufflers are flow restrictors. The quieter they are the more you restrict. Straight through resonators do even less than straight through mufflers to lower noise even if they have have "spiral flow". Silencers with a good flowing muffler are a good compromise.
 
Saw a thread awhile ago where a Mud member was upset with noise on a custom exhaust and tried many different muffler, resonator, high flow cat combos. It was stated that the owner finally found a winning combination.

I tried searching for it but the iPhone app sucks for searching and I couldn't find it.

Maybe a PC search might yield better results.

Found it
"Sumotoy multiple exhaust installs - long" thread

I had to search for "high flow cats"
 
I have a buddy who installed the EMS setup and was sorely disappointed with the sound. He stated it sounds like a "ricer". It looks to be a quality system but I don't understand why they don't put a muffler on it that will eliminate the raspy/drone tone. I built my own cat back system with a Midas muffler that is only six inches in diameter. The sound from it is very close to stock.

6DC990F7-A619-495F-B80C-60406E115DCD-17688-000002F625152365.jpg


3DD30162-7DC3-4C63-AF43-8B7AD40465C8-17688-000002F61C50542A.jpg
 
So, I installed the full cat back, stainless steel exhaust system from EMS a few weeks ago. Single cat, magnaflow muffler, no resonator. Like many, I quickly realize that it is WAY too loud. Don't get me wrong, I love a good exhaust note. I drive an old '93 Chevy turbo diesel with a mandrel bent 3.5" exhaust and love the deep rumble. But seriously, I drove for several weeks with the exhaust "as is" and one can't even carry on a conversation in the vehicle because the drone it too loud on the highway.

Anywho, I ordered the Moroso Spiral Flow exhaust resonator and installed that last week. I live in a small town with no one to TIG weld the resonator in, so I ordered identical clamps that EMS includes and had the small diameter end of the resonator enlarged to slide over the existing exhaust pipe.

Just drove 500 miles this weekend and I still can't hear my own thoughts in the drivers seat with the windows up! It's not so bad with windows down at 55mph...but windows up at 70. YIKES! I am driving from East Texas to Denver this weekend in the LX450 and I AM NOT looking forward to the headache I will be having if I don't fix this ASAP!:bang::bang::bang:

Several thoughts on the matter.
1. When I installed the spiral flow, I noticed that the junction between the o2 sensor pipe and the muffler was loose. I tightened the clamp as much as I possibly could and I can still rotate the pipes. It's not clamping anything! I cut up several aluminum soda cans and used them as shims, but I'm still getting black soot leaking from this clamp spot.

Are these joints and clamps just horrible, and I should invest in the cheap exhaust clamps that pinch the pipes? Or perhaps install a wrap around the existing clamps?

2. This system is designed to bolt onto the car in several spots. I know the flexpipe is in there which is supposed to help with this, but I am skeptical of bolting an exhaust system metal to metal. Is this a design flaw? Is this causing the giant cavern that is the LX interior, to become a resonator that I am sitting in?

Please help. I have now dropped almost $1,500 into the world's prettiest custom LX exhuast...and I'm ready to chunk it out the window! You know it's sad when you take off from a stop light and people are looking around for the pimped out rice rocket...Oh, no...it's just my beefy LX450...:doh:
Hi Brian, sorry to hear that you're unhappy with the sound of the exhaust. Exhaust note is one of those things that is going to be different for every owner. Some owners say that even the most unrestricted version of our exhaust is too quiet. On the other hand some owners say that even our quietest version is too loud. Some of it will also depend no your truck, the weight, the tire size, gearing, and the speed/RPM at which you drive while on the highway. On most trucks that experience what people call "drone" you will notice that it goes away if you speed up slightly or slow down slightly to get your engine RPM's different.

The silencer units we build into exhausts are a great way to quiet the exhaust down, they quiet the exhaust note down I would say around 25-35%. It will still not be as quiet as a factory exhaust, because this is a high flow exhaust system, but it will be much quieter than without the silencer. The quietest setup for our exhaust is dual cats, with silencer, and tailpipe exiting out of the back. The silencer design we use creates a very slight restriction, but is far less restrictive than the OEM muffler. We have dyno tested our exhaust with and without silencer on a stock FZJ80 and there was no real gains or losses. We had the standard variation of 1-2hp on various dyno runs but nothing substantial that would show power losses. Just for kicks, we installed 3 of our silencers back to back to see what the power loss would be (if any) and that put us literally back to identical power as the OEM exhaust. But that is with 3 silencer units (6 disks) back to back.

If you want the truck as quiet as possible my recommendation would be to get an EMSPowered tailpipe that is a turndown, or rear exit along with one silencer. If you'd like we can modify your existing tailpipe that you already have if you can ship it back to us. Let me know if you have any questions or if there's anything I can do to help.

Baktash
 
I have a buddy who installed the EMS setup and was sorely disappointed with the sound. He stated it sounds like a "ricer". It looks to be a quality system but I don't understand why they don't put a muffler on it that will eliminate the raspy/drone tone. I built my own cat back system with a Midas muffler that is only six inches in diameter. The sound from it is very close to stock.

I'm fairly sure that the muffler you are using from Midas is not a high flow straight through muffler. It is an OEM style baffled muffler and is just as restrictive and looks to be aluminized steel. The EMSPowered exhaust is available with different options to achieve different levels of sound so that people can customize it to their desired goals while still maintaining a high flow exhaust setup that has proven power gains. For those ordering our exhaust systems for the first time who don't know what options exactly to order to achieve their desired result, I would suggest emailing or calling us first so that we can consult you on the best way to build the exhaust in order to make sure you're happy with it.
 
I too went through many iterations of the EMS exhaust and have a system that is tolerable now - it's nice around town, a bit loud (but not overly so) on the freeway.

First off, fix your leak.

I used rubber bushings, or isolators, at every mounting location. This made a nice difference, is easy and dirt cheap. Especially at the rear mounts, imho some rubber is essential.

My flex pipes failed pretty rapidly (and no support, huh) so I have the stock downpipe, Magnaflow muffler, Magnaflow resonator, and a round large cat (I forget the brand).

Lastly, get the tailpipe exit out from under the truck - either just outside the body if to the side, or just past the bumper if it goes out the rear.

Good luck with it.
 
The underbody of that truck is impressive. No rust at all.
 
Back
Top Bottom