Birfield questions.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 25, 2015
Threads
13
Messages
91
Location
Vancouver, WA
OK, so I have been googling and searching for a while now, given I have not searched every corner of the internet... How ever Im hoping some of you guys could help me out.

My issue, by drivers side front birfield has been making a mild clicking for the last year... it did go away when I added grease. I have no grease leaking from the knuckles either.

My question is, do Birfields in fact "go bad" or "snap" because I have read/heard points that say on a stock rig (mine is OEM), the birfield should last a life time... but then I hear that they need to be replaced every 90-110K miles.

Just looking for clarification.

Thank you all!
 
afaik if cared for 300-400k is a good run for a set of birfs, this includes swapping sides. which for many is a lifetime part lol.
 
They last a very long time. I have been 1000's of miles while clicking.
 
Pro tip that will make this much faster process. Get a new tube of the moly grease of your choice. Fill a latex glove palm section with a big dollop of new grease. Cut the tip off one of the finger sections and wad the rest of fingers up near the palm section and twist the wrist section closed. Remove filler plug on knuckle put the finger with the missing tip off in the hole and use the glove like a bakers "pipping bag" and fill your empty birfs in 15 secs, with out endless arm numbing pumping of the grease gun.....
 
Typically birfs start to go bad around 170k. The clicking is a warning of excessive wear. They are worn out, you can find economy replacements on eBay. I've never heard of someone letting a birf continually click. But birfs are basically CV joints, I have heard of people ignoring them despite the clicking and they eventually grenade
 
I'm glad to hear most people are getting so many miles out of them. I've been worried about mine, but haven't had the time and space to check them out. I bought my FJ80 with 240k and the next day noticed the left side clicking when I made sharp turns, but after a trip to the sand dunes for some abuse and a 450 miles of highway the noise has gone away and "knock on wood" hasn't come back in the last 10k of daily driving....
 
Whatever you do.... Please do not buy "economy parts... Cheap on EBay"! Cruisers are not "cheap" vehicles, so if you change it out.... Do it right. The next owner (or hopefully yourself) will appreciate it years down the road! Good luck.
 
Now at 348,000 miles on the original CV joints (Birfields). Swapped sides at close to 300,000 miles but once I had them apart I wished I had done that sooner as the left Birf showed significantly more wear than the right. Swapping sides provides a couple of benefits, with the axle shafts removed from the Birfs and taking the Birfs apart you can inspect them for damage and then completely clean out any grit, grime and old contaminated grease that has accumulated inside the birf. Once inspected and cleaned up they are easily re-packed with fresh grease before putting the axle shafts back in. I've put 55,000 more miles on those Birfs since swapping sides, no clicking, no problems.
 
I'm going to swap sides when I do my front knuckle rebuild in a couple months because the right side has started to make a little noise at full turning lock.
 
I got the birf click on my front right side on my 93. Never had to do the flip before. Hopefully it's not too big of a chore.

What kind of time frame am I looking at with this? Can I do the full knuckle rebuild and flip flop birfs in a weekend? Don't a knuckle job before but it's been about 7 years...

I'm a :banana::banana: mechanic. Maybe :banana::banana::banana:...
 
Flip them when you do rebuild. If you have noise or leaking it's time to rebuild.
It's not hard to switch them, but I would have the cir-clips on hand. They are cheap and your local dealer can likely get them in a day.
Then you have the piece of mind that Birfs are clean and in fresh grease.
Use a piece of pipe and having 2 ppl makes it much easier to seperate them.
A Metal Hose clamp a little bigger than 1" makes installing the circlips cake.
The cage goes in only one way, learned that the hard way.
 
Oh, I've had leaking and clicking for 11k miles. Since I bought it in March. I just haven't had the time to do anything other than add moly every few weeks. Which makes it a little quieter. I've had the knuckle kit from Cruiser Outfitters sitting, waiting patiently for that long too.
 
I did the swap sides. I had a little clicking when turning and accelerating. Now the clicking is gone. You can get it done in a weekend. I am not a pro but with help here its easy.
 
I got 350,000 plus on mine and they both click now alas a rebuild is in order soon I still wheel it just easy on the skinny pedal and if I do have to gas it I make sure my wheels are straight if possible.can't wait to shoot those big bearings in em at watermelons and see the devastation
 
Pro tip that will make this much faster process. Get a new tube of the moly grease of your choice. Fill a latex glove palm section with a big dollop of new grease. Cut the tip off one of the finger sections and wad the rest of fingers up near the palm section and twist the wrist section closed. Remove filler plug on knuckle put the finger with the missing tip off in the hole and use the glove like a bakers "pipping bag" and fill your empty birfs in 15 secs, with out endless arm numbing pumping of the grease gun.....

Surprise! The tip of most grease guns does just fit into the grease hole on top of the knuckle housing. We have been able to do this with many different brands. You would almost think that Toyota planned it that way? I add about 1/2 tube to each knuckle twice a year.
 
Surprise! The tip of most grease guns does just fit into the grease hole on top of the knuckle housing. We have been able to do this with many different brands. You would almost think that Toyota planned it that way? I add about 1/2 tube to each knuckle twice a year.

Yeah, I use a ziploc Baggie. I can fill my knuckles in about 30 secs. Seeing as how I am doing it every couple of weeks...
 
Ink, yeah I know the gun tips fit, but unless you have one of the fancy Lincoln battery powered guns, or a pneumatic one this takes a good deal of time and is arm numbing. The glove/sammich bag trick, only takes 10-15 secs once you have the plug out vs 3 mins of or pumping away at it.
 
3 minutes X 2 knuckles X twice a year = 12 minutes a year. I spend more than that each week on my rig. I spend more than that each day reading MUD. I guess it's a darn good thing that I'm retired, or I'd have to stop greasing my knuckles! :deadhorse:
 
Back
Top Bottom