Bare 1FZ block weight

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Best number I know from "80 trivia in my head" - is a longblock is 585#'s from a long dead old post / thread.

I can't cite the thread, useless fact in my head.

Not a great help, but maybe you can guess from there, since the head was what - 75#'s or so, and the rotating parts I hazard another amount less than that (had pistons & rods in hand, never held the crank bare - full disclosure)

HTH, bet it doesn't :meh:

Hit up @landtank or @Tools R Us - bet they have seen a few bare blocks.
 
Hmmm yeah I kind of figured this post was a long shot. But was curious anyways.

I was watching a show and they were talking about dropping engine weight and a cast iron big block Chevy 454 was 225# and a new aluminum block was 90#!

I think it's becoming harder and harder to argue against an LS swap in these trucks, an aluminum head and block, crate engine like the 376/525hp would drop 300-350# off the front end.

I know I will get s*** for this, but I am not sure reliability comparing a 1980's designed I6 vs a 2010 V8 is really an issue. You can certainly put together a hell of a nice LS with easy to source parts.

And much like the guys that switched to green coolant years ago, you can walk into just about any parts store and get parts.

Besides the name plate, what is it about LS engines that would discount it as a potential swap? Please throw out any ideas no matter how insignificant.
 
No reason to discount the LS. If you want to do a motor swap, an lS is an excellent choice. Given the LS3 eRod will drop in and still allow you to pass CA smog, what's not to like? If petrol isn't your drink of choice, Cummins has now launched an EPA compliant diesel motor "rePower" business. Lots of great choices.

That said, for many that lack the engineering, fabrication and financial resources, rebuilding the venerable 4.5L is a cakewalk and you know what you're dealing with: bulletproof reliability, reliability and reliability.
 
That said, for many that lack the engineering, fabrication and financial resources, rebuilding the venerable 4.5L is a cakewalk and you know what you're dealing with: bulletproof reliability, reliability and reliability.

This is really it for me. I don't hate the idea of a lighter, more powerful motor, what I do hate is the thought of even considering doing it myself and the thought of paying someone else to do it is just not something people in my tax bracket can really afford. I think the I6 is a fine motor for this truck and it is very reliable. In the event that I do need to take it somewhere for service, at least they will be able to use the FSM and the wiring diagrams, etc.

For those that have the time and resources to do these LS swaps the right way, more power to them, but for the rest of us mortals, the motor that the truck came with is sufficient.
 
Besides the name plate, what is it about LS engines that would discount it as a potential swap? Please throw out any ideas no matter how insignificant.

the biggest downer to me is the trans. chevy has a crap transmission, no telling how many i have killed. my 442 is a beast that has over 350K miles on it.

the reasons i am going to the trouble is simple. sourcing parts. i can go to any local place and get anything i need for the 5.3 in stock and for less money than the same part for my 1FZ. when my engine goes it will cost just as much to have it rebuilt correctly as it will to swap in the 5.3 myself.

i can do all the major work myself but i am not a machine shop. welding in motor mounts is pretty simple since i have a welder but decking the head and block require tools most people dont have sitting around. by time i buy a good rebuild kit, have everything done right, spend the time to check bearings, drop in the new engine... i could have just done the LS swap.

i love my engine i have now, it makes ok power and it a great engine so i would keep it if i could. sad truth is it was only in a limited range of vehicles. not like i can go grab a 4.7 bottom end out of something else like my 100 series and keep going. every few days there is someone on here talking about the engine going out and looking for a used one. there are less and less and everyday hundreds of new GEN III and IV chevy motors show up in the junkyards for cheap.
 
This is really it for me. I don't hate the idea of a lighter, more powerful motor, what I do hate is the thought of even considering doing it myself and the thought of paying someone else to do it is just not something people in my tax bracket can really afford. I think the I6 is a fine motor for this truck and it is very reliable. In the event that I do need to take it somewhere for service, at least they will be able to use the FSM and the wiring diagrams, etc.

For those that have the time and resources to do these LS swaps the right way, more power to them, but for the rest of us mortals, the motor that the truck came with is sufficient.
this is also why a complete bolt-in kit would push me over the edge...

i don't have the time/technical expertise to put this together myself... but if i had a kit with every bracket and adapter needed, i'd go for it...
 
I miss having 375+ HP in a 6000 lb truck. If it was easier (kit) to swap to an LS, I would do it before rebuilding the 1FZ.

The replacement parts of walking into any FLAPS to get parts is a BIG deal. That's why all the Hot Rodders do it.

I also drive a Studebaker and can already relate to this issue. When I take a long trip, I have to take certain parts with me because if they fail, I cannot find them when on the road. I considered swapping the original Studebaker engine (259CID) to an LS, but my car is all numbers matching. The car would lose almost 500 lb swapping to an LS with a 700R4. The stock 259 weighs more than a fully assembled 454.
 
I think the comments on how easy it is to get parts for the Cheyy engines speaks for it self. They are easy to come by because they are sold frequently.

Decades of driving 100s of thousands of miles and I have never needed to source a part for my I6 engines. So no need = no sales = stock parts in the stores.
 
That 600# number must have been at least a short block right? If not a long block? If it was just the block that is nuts. I suppose while crazy it is that heavy, it stands to reason why it is pretty bombproof. I had a middle east shop on the 1FZ turbo page tell me all the planning I am doing for my engine was unnecessary and that they make over 900hp on factory block and factory head with nothing but valve springs and head studs.

Had a 1Fz long block 600# per recycling yard scale IIRC

@BILT4ME what is FLAPS? :popcorn:
 
I get you on all sides of the this issue.

Did a swap from a Vortec gen 350 to a LS3 in my boat, it's a motor that is far & away better than any recent bowtie V8's out of the box. Sure, you can do all the mods like splayed main bolts & work over the galley castings, but for simple out-of-the box/wreck & just plugging in, LS gen motors are like common sense finally took root @ GM / Chev.

For a landcruiser - yeah, keeping the I6 seems the way for some, and then there are those of us who can think through & have space to execute a swap, if going above what a S/C bolted on returns (not sure that's even relevant, no clue if they are still part of Magnusson's repro S/C's) - seems the "since I have the cash to LSx a 80" would be seeing the 2uz or if anyone has done a 5.7 Toy motor.

I dislike timing belt motors myself (chalk it up to VW's I had as a kid) - so for me the "if I had the $$$ motor" would have a timing chain, no 2 ways about it.

I know I have far greater peace of mind due to the LSx motor in my boat over a Vortec, esp if we don't see land. Just me though.
 
Thought it might have been f***in' auto parts store which has been more my experience with availability things TEQ related..it's been about a year and from what I remember I had some other misc. stuff in the truck but not a lot..it was a long block..dang I don't remember what I dumped that day..yeah they are unbelievably heavy though.. watching those UAE sand drags says it all about the 1fz potential..personally I would do an LS if I hadn't already gone diesel
 
Just spit balling here, but what would it take to turn something like a Tahoe into a truck as capable as an 80 Series?
Could be done quite easily. Just upgrade the frame, axles, suspension, drivetrain, body structure and overall durability.
 
I have a bare block sitting in the yard but no scale that the wife would let me set it on. I've moved it around a few time by myself and it's not fun. Mostly dragging or lifting to move a foot at a time.
 
Back
Top Bottom