Builds Back in a 60 series - 1HZ Swap

[davegonz]

Frame clean up and paint.

 

[davegonz]

Placement .

 

[ceylonfj40nut]

Looking great!!

 

[bottombracket]

It is SO CLOSE. If we had those crossmember bolts...

Can't wait to see it bolted in place in the engine bay

 

[Hojack]

Placement .

View attachment 1749961 View attachment 1749962

Motor looks really clean.

 

[davegonz]

With a ton of help from Steve and Galen @bottombracket , we were able to weld in the frame side engine mounts this morning!

If anyone is looking to do a 1 HZ or 1HD swap into a 60 or 62, Georg's mounts makes things easier. For a how-to and pics, see the updated pics that Galen posted in this thread: 1HZ/1HDT engine mounting brackets for 6x series cruisers

 

[davegonz]

Now I just need to score a 12v fuel cut solenoid ....and a fully charged battery.

 

[Mr Cimarron]

Now I just need to score a 12v fuel cut solenoid ....and a fully charged battery.

Run a pull cable.

 

[davegonz]

On a rotary pump?

 

[ceylonfj40nut]

With a ton of help from Steve and Galen @bottombracket , we were able to weld in the frame side engine mounts this morning!

If anyone is looking to do a 1 HZ or 1HD swap into a 60 or 62, Georg's mounts makes things easier. For a how-to and pics, see the updated pics that Galen posted in this thread: 1HZ/1HDT engine mounting brackets for 6x series cruisers

View attachment 1755534 View attachment 1755535 View attachment 1755536 View attachment 1755537

This is TITs man. Toyota In Tune.

 

[Mr Cimarron]

On a rotary pump?

You got me there. Thats way above my knowledge. I'm more of an inline guy where it just pulls a lever.

 

[Hojack]

With a ton of help from Steve and Galen @bottombracket , we were able to weld in the frame side engine mounts this morning!

If anyone is looking to do a 1 HZ or 1HD swap into a 60 or 62, Georg's mounts makes things easier. For a how-to and pics, see the updated pics that Galen posted in this thread: 1HZ/1HDT engine mounting brackets for 6x series cruisers

View attachment 1755534 View attachment 1755535 View attachment 1755536 View attachment 1755537

What motor mount shock absorber is that?

 

[davegonz]

Rubber mounts? Aftermarket. We'll see how long they last.

https://www.amazon.com/Febest-Toyota-Front-Engine-12361-17011/dp/B00C6N0QS0

 

[Loober]

Now I just need to score a 12v fuel cut solenoid ....and a fully charged battery.

Dave, do you have a 24v solenoid? I will trade you for a 12v.

 

[davegonz]

Yes, I do. I just haven't tested it since I don't have a 24V source. When I apply 12V, it does nothing.

 

[Loober]

I have a 12v one from the FT I swapped in, I also have not tested it, I assume its good as the rest of the engine was in working order, I have no use for it, be nice to have a 24v for a spare.

 

[davegonz]

Let's do it Loober .

 

[davegonz]

Now that my son's Eagle scout project is done, I had some free time this morning to work on the truck. I wired up the starter circuit with a dedicated relay and also installed another relay for the glow plugs. I also got the oil gauge working.

Oh yeah, I also drained the fuel tank of the old gas. Getting close!

 

[Hojack]

Nice work Dave. Even getting to turn the motor over gets exciting after all the hard work. What size exhaust pipe are you going to run?

 

[Mr Cimarron]

That was one hell of tease, but nice work.